Journal of the Egyptian Society of Tribology

Author Index

A

A., Ibrahim DYNAMIC CHARACTERISTICS STUDY OF RE-ENTRANT HONEYCOMB AUXETIC STRUCTURE FOR AL6082 [Volume 17, Issue 3, 2020, Pages 37-47]
A., Mostafa DYNAMIC CHARACTERISTICS STUDY OF RE-ENTRANT HONEYCOMB AUXETIC STRUCTURE FOR AL6082 [Volume 17, Issue 3, 2020, Pages 37-47]
Abd, El-Gawwad K. A. DEVELOPMENT OF THE COOLING SYSTEM OF A SINGLE CYLINDER DIESEL ENGINE [Volume 11, Issue 4, 2014, Pages 36-45]
Abd El-Aal, U. M. EXPERIMENTAL STUDY OF ABRASIVE WEAR RESISTANT POLYESTER COMPOSITES [Volume 7, Issue 1, 2010, Pages 26-35]
Abdel-Aziz, A. I. EFFECTS OF DESIGN AND OPERATING PARAMETERS ON HANDLING BEHAVIOR OF A THREE-WHEEL VEHICLE [Volume 18, Issue 2, 2021, Pages 50-62]
Abdel-barr, M. M. EFFECT OF HEAT TREATMENT ON THE TRIBOLOGICAL PROPERTIES OF POLYURETHANE COATINGS [Volume 12, Issue 2, 2015, Pages 30-43]
Abdel-Barr, M. M. TRIBOLOGICAL AND MECHANICAL PERFORMANCE OF POLYESTER COMPOSITES FILLED BY JASMINE DRY LEAVES [Volume 10, Issue 4, 2013, Pages 58-65]
Abdel-Barr, M. M. TRIBOLOGICAL PERFORMANCE OF POLYMER COMPOSITES REINFORCED BY AGRICULTURAL WASTES [Volume 10, Issue 2, 2013, Pages 36-45]
Abdel-Jaber, G. T. PROPER SELECTION OF INDOOR FLOOR BASED ON FRICTION COEFICIENT AND ELECTRIC STATIC CHARGE [Volume 13, Issue 1, 2016, Pages 1-14]
Abdel-Jaber, G. T. FRICTION COEFFICIENT AND ELECTROSTATIC CHARGE GENERATED FROM RUBBER FOOTWEAR SLIDING AGAINST FLOORING MATERIALS [Volume 11, Issue 4, 2014, Pages 13-24]
Abdel-Jaber, G. T. ENHANCING THE FRICTIONAL PERFORMANCE OF SPORT GLOVES [Volume 17, Issue 4, 2020, Pages 23-33]
Abdel-Jaber, G. T. THE EFFECT OF WELDING FRICTION PARAMETERS ON THE MECHANICAL PROPERTIES OF THE MAINTAINED ANODIC YOK IN THE ALUMINUM INDUSTRY [Volume 20, Issue 3, 2023, Pages 63-74]
Abd El Jaber, G. T. INFLUENCE OF ADDING CONTAMINANTS PARTICLES TO LITHIUM GREASE ON FRICTION COEFFICIENT [Volume 14, Issue 1, 2017, Pages 31-39]
Abdel-Sattar, S. EFFECT OF MAGNETIC FIELD ON THE FRICTION AND WEAR DISPLAYED BY THE SCRATCH OF OIL LUBRICATED STEEL [Volume 9, Issue 4, 2012, Pages 12-27]
Abdel-Sattar, S. INFLUENCE OF MAGNETIC FIELD ON THE FRICTION AND WEAR CAUSED BY THE SCRATCH OF OIL LUBRICATED HIGH DENSITY POLYETHYLENE [Volume 9, Issue 2, 2012, Pages 1-14]
Abdel-Sattar, S. INFLUENCE OF MAGNETIC FIELD ON THE ACTION MECHANISM OF LUBRICANT ADDITIVES [Volume 9, Issue 2, 2012, Pages 15-28]
Abdel-Sattar, S. INFLUENCE OF MAGNETIC FIELD ON FRICTION COEFFICIENT DISPLAYED BY THE OIL LUBRICATED SLIDING OF STEEL [Volume 9, Issue 2, 2012, Pages 29-42]
Abdel-Sattar, S. INFLUENCE OF MAGNETIC FIELD ON THE SLIDING OF STEEL AGAINST LUBRICATED POLYAMIDE [Volume 9, Issue 1, 2012, Pages 39-51]
Abdel-Sattar, S. EFFECT OF MAGNETIC FIELD ON FRICTION COEFFICIENT DISPLAYED BY ROLLING BEARINGS [Volume 8, Issue 3, 2011, Pages 27-39]
Abdelwahab, Sabreen Abdallah DESIGN, SIMULATION AND CONTROL OF A NOVEL HYDRAULIC BRAKING SYSTEM [Volume 21, Issue 2, 2024, Pages 15-38]
Abd-Rabou, M. ENHANCING THE TRIBOLOGICAL PROPERTIES OF EPOXY RESIN USING TiO2 NANOPARTICLES [Volume 7, Issue 4, 2010, Pages 1-10]
Abd-Rabou, M. ENHANCING THE TRIBOLOGICAL PROPERTIES OF EPOXY RESIN USING TiO2 NANOPARTICLES [Volume 7, Issue 2, 2010, Pages 1-10]
Abeer, A. E. EFFECT OF MAGNETIC FIELD ON FRICTION AND WEAR OF STEEL [Volume 8, Issue 2, 2011, Pages 1-15]
Abeer, A. E. EFFECT OF MAGNETIC FIELD ON FRICTION AND WEAR OF BRASS [Volume 8, Issue 2, 2011, Pages 16-30]
Aboelenen, M. S. ON THE STRENGTH AND FAILURE MODE OF CRACKED BOLTED JOINT OF POLYMERIC COMPOSITE [Volume 9, Issue 3, 2012, Pages 13-23]
Abou-Hashema, M. INVESTIGATION OF FRICTION COEFFICIENT OF THE SURFCAE OF ROBOTIC GRIPPER [Volume 18, Issue 1, 2021, Pages 29-39]
Abou-Hashema, M. INFLUENCE OF ELECTROSTATIC CHARGE ON FRICTION OF GRIPPER IN HANDLING MATERIAL [Volume 18, Issue 2, 2021, Pages 63-74]
Abou-Hashema, M. CONTROL OF FRICTION TO ADAPT GRIP FORCE BY ELECTROSTATIC CHARGE [Volume 18, Issue 3, 2021, Pages 52-58]
Abu Elainin, H. M. INFLUENCE OF BRUSHING FORCE ON ABRASIVE WEAR OF TEETH [Volume 8, Issue 4, 2011, Pages 48-59]
Abu Elainin, H. M. EFFECT OF MAGNETIC FIELD ON FRICTION AND WEAR OF STEEL [Volume 8, Issue 2, 2011, Pages 1-15]
Abu Elainin, H. M. EFFECT OF MAGNETIC FIELD ON FRICTION AND WEAR OF BRASS [Volume 8, Issue 2, 2011, Pages 16-30]
Abu El-Magd, G. A. ECO-GREEN SILVER NANOPARTICLES PREPARATION, CHARACTERIZATION, AND TRIBOLOGICAL ENHANCEMENTS ON 6061AMC [Volume 21, Issue 1, 2024, Pages 62-77]
Abu-El-Yazied, T. G. FRACTURE TOUGHNESS ANALYSIS OF AXIAL PARTIALLY THROUGH CRACKS IN X65 AND X70 STEEL PIPES [Volume 17, Issue 1, 2020, Pages 46-52]
Abu-El-Yazied, T. G. SURFACE IMPROVEMENT OF 7075 ALLOY USING FRICTION STIR PROCESSING [Volume 17, Issue 2, 2020, Pages 1-12]
Abu-El-Yazied, T. G. EFFECTS OF DESIGN AND OPERATING PARAMETERS ON HANDLING BEHAVIOR OF A THREE-WHEEL VEHICLE [Volume 18, Issue 2, 2021, Pages 50-62]
A. H., Zeinab WIND SPEED SENSOR BASED ON SLIDING TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 4, 2023, Pages 106-116]
Ahmad, M. Makadi OPTIMIZATION OF WEAR RESISTANCE AND AMORPHOUS CONTENT FOR FECRMOCB-MG COMPOSITE BY USING FUZZY LOGIC CONTROL SYSTEM [Volume 18, Issue 4, 2021, Pages 66-78]
Ahmed, A. Elsadek OPTIMIZATION OF ROUNDNESS ERROR IN HARD TURNING OF AISI H13 TOOL STEEL [Volume 17, Issue 1, 2020, Pages 53-61]
Ahmed, A. Elsadek SURFACE ROUGHNESS PREDICTION IN HARD-TURNING WITH ANN AND RSM [Volume 17, Issue 2, 2020, Pages 13-22]
Ahmed, A. Gad El-Mawla CONDITION MONITORING OF LOCALIZED OUTER RACE DEFECTS OF TAPER ROLLER BEARINGS USING VIBRATION ANALYSIS [Volume 20, Issue 1, 2023, Pages 51-62]
Ahmed, A. Gad El-Mawla WEAR AND MECHANICAL PERFORMANCE OF HDPE AL2O3 NPS AND CNTS MATRIX AS FRICTIONAL MATERIALS APPLICATIONS [Volume 20, Issue 3, 2023, Pages 109-119]
Ahmed, M. Gaafer OPTIMIZATION OF ROUNDNESS ERROR IN HARD TURNING OF AISI H13 TOOL STEEL [Volume 17, Issue 1, 2020, Pages 53-61]
Ahmed, M. Gaafer SURFACE ROUGHNESS PREDICTION IN HARD-TURNING WITH ANN AND RSM [Volume 17, Issue 2, 2020, Pages 13-22]
Ahmed, Wael Abouelwafa OPTIMIZING MRI-BASED MEDICAL DIAGNOSIS: COMPARATIVE ANALYSIS OF EFFICIENTNET PERFORMANCE WITH VARYING LEARNING RATES [Volume 21, Issue 2, 2024, Pages 105-119]
Ahmed, Wael Abouelwafa ARTIFICIAL PANCREAS WITH CLOSED-LOOP CONTROL FOR TYPE 1 DIABETES: DESIGN, IMPLEMENTATION, AND EVALUATION [Volume 21, Issue 1, 2024, Pages 91-108]
Al-Abdeen, S. Z. EFFECT OF HEAT TREATMENT ON THE TRIBOLOGICAL PROPERTIES OF TOOL STEEL AND MOLD STEEL [Volume 21, Issue 1, 2024, Pages 39-52]
Alahmadi, A. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF HIGH DENSITY POLYETHYLENE AGAINST AIR BUBBLE SHEET OF LOW DENSITY POLYETHYLENE [Volume 14, Issue 4, 2017, Pages 27-39]
Alahmadi, A. TRIBOELECTRIFICATION OF ENGINEERING MATERIALS [Volume 11, Issue 1, 2014, Pages 12-23]
Alahmadi, A. ELECTRIC STATIC CHARGE GENERATED FROM THE SLIDING OF POLYMERS AGAINST STAINLESS STEEL [Volume 11, Issue 1, 2014, Pages 24-34]
Alahmadi, A. EFFECT OF MAGNETIC FIELD ON THE FRICTION AND WEAR DISPLAYED BY THE SCRATCH OF OIL LUBRICATED STEEL [Volume 9, Issue 4, 2012, Pages 12-27]
Alahmadi, A. INFLUENCE OF MAGNETIC FIELD ON THE ACTION MECHANISM OF LUBRICANT ADDITIVES [Volume 9, Issue 2, 2012, Pages 15-28]
Alahmadi, A. INFLUENCE OF MAGNETIC FIELD ON FRICTION COEFFICIENT DISPLAYED BY THE OIL LUBRICATED SLIDING OF STEEL [Volume 9, Issue 2, 2012, Pages 29-42]
Alahmadi, A. INFLUENCE OF MAGNETIC FIELD ON THE SLIDING OF STEEL AGAINST LUBRICATED POLYAMIDE [Volume 9, Issue 1, 2012, Pages 39-51]
Alahmady, A. EFFECT OF MAGNETIC FIELD ON FRICTION COEFFICIENT DISPLAYED BY ROLLING BEARINGS [Volume 8, Issue 3, 2011, Pages 27-39]
Alain, Dufresne A. TRIBOLOGICAL BEHAVIOR OF ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE NANOCOMPOSITES [Volume 18, Issue 2, 2021, Pages 27-41]
Aldomiaty, A. A. FRACTURE TOUGHNESS ANALYSIS OF AXIAL PARTIALLY THROUGH CRACKS IN X65 AND X70 STEEL PIPES [Volume 17, Issue 1, 2020, Pages 46-52]
AlEili, Y. TRIBOELECTRIFICATION OF POLYMERIC TEXTILES [Volume 12, Issue 1, 2015, Pages 26-36]
AlEili, Y. FRICTION COEFFICIENT DISPLAYED BY FOOT SLIDING ON THE SURFACE OF SKATEBOARD [Volume 11, Issue 3, 2014, Pages 60-68]
AlGethami, A. A. FRICTION COEFFICIENT BETWEEN CLOTHES AND CAR SEAT COVERS [Volume 8, Issue 4, 2011, Pages 36-47]
Al-Grafi, M. EFFECT OF TIP RADIUS OF THE INDENTERS ON FRICTION COEFFICIENT OF THE SCRATCHED METALLIC SHEETS [Volume 10, Issue 1, 2013, Pages 26-37]
AlHarthi, O. FRICTION COEFFICIENT DISPLAYED BY FOOT SLIDING ON THE SURFACE OF SKATEBOARD [Volume 11, Issue 3, 2014, Pages 60-68]
Ali, A. S. ELECTROSTATIC CHARGE GENERATED FROM SLIDING ON POLYETHYLENE TURF [Volume 17, Issue 1, 2020, Pages 1-13]
Ali, A. S. PROPER SELECTION OF POLYMERIC FIBERS REINFORCING EPOXY [Volume 16, Issue 3, 2019, Pages 26-35]
Ali, A. S. ENHANCING THE TRIBOLOGICAL PROPERTIES OF BEARINGS IN MANIPULATORS [Volume 17, Issue 1, 2020, Pages 62-72]
Ali, A. S. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF HIGH DENSITY POLYETHYLENE AGAINST AIR BUBBLE SHEET OF LOW DENSITY POLYETHYLENE [Volume 14, Issue 4, 2017, Pages 27-39]
Ali, A. S. INFLUENCE OF PRE-TRIBOELECTRIFICATION ON FRICTION COEFFICIENT DISPLAYED BY POLYMERIC MATERIALS [Volume 14, Issue 4, 2017, Pages 54-70]
Ali, A. S. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF POLYETHYLENE AGAINST POLYTETRAFLUOROETHYLENE [Volume 14, Issue 3, 2017, Pages 34-49]
Ali, A. S. DEPENDENCY OF FRICTION ON ELECTROSTATIC CHARGE GENERATED ON POLYMERIC SURFACES [Volume 14, Issue 3, 2017, Pages 50-65]
Ali, A. S. EFFECT OF COPPER WIRES REINFORCING POLYETHYLENE ON GENERATING ELECTROSTATIC CHARGE [Volume 13, Issue 4, 2016, Pages 28-40]
Ali, A. S. TRIBOELECTRIFICATION OF LATEX AND POLYETHYLENE GLOVES [Volume 13, Issue 3, 2016, Pages 34-45]
Ali, A. S. TRIBOELECTRIFICATION OF SHOE COVER AND FLOOR IN HOSPITALS [Volume 12, Issue 4, 2015, Pages 1-14]
Ali, A. S. TRIBOELECTRIFICATION OF SHOE SOLES AND FLOOR IN HOSPITALS [Volume 12, Issue 3, 2015, Pages 1-14]
Ali, A. S. DRY SLIDING OF TREADED RUBBER ON CERAMICS [Volume 10, Issue 4, 2013, Pages 15-28]
Ali, A. S. REDUCING THE ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON POLYETHYLENE ARTIFICIAL TURF [Volume 17, Issue 2, 2020, Pages 40-49]
Ali, A. S. EFFECT OF BLENDING POLYETHYLENE TURF BY POLYMETHYL METHACRYLATE AND POLYAMIDE ON GENERATION OF ELECTROSTATIC CHARGE [Volume 17, Issue 2, 2020, Pages 50-60]
Ali, A. S. INFLUENCE OF BLENDING POLYETHYLENE TURF BY COPPER TEXTILE ON GENERATION OF ELECTROSTATIC CHARGE [Volume 17, Issue 3, 2020, Pages 14-25]
Ali, A. S. EFFECT OF BLENDING POLYETHYLENE TURF BY CONDUCTING MATERIALS ON ELECTROSTATIC CHARGE GENERATED FROM FRICTION [Volume 17, Issue 3, 2020, Pages 59-71]
Ali, A. S. EFFECT OF CONDUCTING MATERIALS ON ELECTROSTATIC CHARGE GENERATED FROM SLIDING ON POLYETHYLENE TURF [Volume 17, Issue 3, 2020, Pages 48-58]
Ali, A. S. SLIDING OF POLYETHYLENE COMPOSITES ON ARTIFICIAL TURF [Volume 17, Issue 4, 2020, Pages 12-22]
Ali, A. S. PROPER MATERIAL SELECTION OF MEDICAL GLOVES [Volume 17, Issue 4, 2020, Pages 1-11]
Ali, A. S. EFFECT OF VEGETABLE OILS AS LUBRICATING/COOLING MEDIUM DURING MACHINING PROCESSES ON SURFACE ROUGHNESS [Volume 18, Issue 1, 2021, Pages 1-7]
Ali, A. S. SELECTION OF FLOOR MATERIALS IN HOSPITALS TO RESIST COVID-19 [Volume 18, Issue 1, 2021, Pages 40-51]
Ali, A. S. TRIBOELECTRIFIED MATERIALS OF FACEMASK TO RESIST COVID-19 [Volume 18, Issue 1, 2021, Pages 52-62]
Ali, A. S. PROPER MATERIAL SELECTION OF MEDICAL SAFETY GOGGLES [Volume 18, Issue 2, 2021, Pages 1-14]
Ali, A. S. PROPSED MATERIALS FOR FACE MASKS [Volume 18, Issue 3, 2021, Pages 35-41]
Ali, A. S. PROPER SELECTION MATERIALS OF FACE SHIELDS, EYEGLASSES AND GOGGLES [Volume 18, Issue 3, 2021, Pages 42-51]
Ali, A. S. SELECTION OF THE PROPER MATERIALS FOR MEDICAL FACEMASK [Volume 18, Issue 4, 2021, Pages 14-24]
Ali, A. S. ENHANCING THE PERFORMANCE OF THE MEDICAL FACEMASK [Volume 18, Issue 4, 2021, Pages 25-36]
Ali, A. S. DEVELOPING THE PERFORMANCE OF THE MEDICAL FACEMASK TO RESIST COVID-19 [Volume 19, Issue 1, 2022, Pages 1-13]
Ali, A. S. INCREASING THE EFFICIENCY OF THE MEDICAL FACEMASK TO RESIST COVID-19 [Volume 19, Issue 2, 2022, Pages 1-11]
Ali, A. S. TRIBOELECTRIC NANOGENERATOR BASED ON CONTACT AND SEPARATION AS WELL AS SLIDING OF POLYAMIDE ON POLYTETRAFLUOROETHELENE [Volume 20, Issue 1, 2023, Pages 32-40]
Ali, A. S. ENHANCING THE EFFICIENCY OF TRIBOELECTRIC NANOGENERATOR BY ELECTROSTATIC INDUCTION [Volume 20, Issue 1, 2023, Pages 41-50]
Ali, A. S. TRIBOELECTRIC NANOGENERATOR BASED ON TRIBOELECTRIFICATION AND MAGNETIC FIELD [Volume 20, Issue 2, 2023, Pages 1-12]
Ali, A. S. PERFORMANCE OF TRIBOELECTRIC NANOGENERATOR ENHANCED BY ELECTROSTATIC INDUCTION [Volume 20, Issue 2, 2023, Pages 13-22]
Ali, A. S. EFFECT OF MAGNETIC FIELD ON THE VOLTAGE OUTPUT OF TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 3, 2023, Pages 85-94]
Ali, A. S. EFFECT OF MULTI-PASS SHIELDED METAL ARC WELDING ON MICROSTRUCTURE CHARACTERIZATION AND MECHANICAL PROPERTIES OF 2507 SUPER DUPLEX STAINLESS STEEL [Volume 20, Issue 3, 2023, Pages 95-108]
Ali, A. S. REDUCING ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON PROPOSED ARTIFICIAL TURF [Volume 21, Issue 1, 2024, Pages 1-11]
Ali, A. S. INFLUENCE OF MAGNETIC FIELD ON THE PERFORMANCE OF THE TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 1, 2024, Pages 12-23]
Ali, A. S. DEVELOPMENT OF ELECTRONIC SKIN BASED ON BIDIRECTIONAL DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 1, 2024, Pages 134-144]
Ali, A. S. DEVELOPMENT OF DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 2, 2024, Pages 1-14]
Ali, A. S. STATISTICAL ANALYSIS ON MECHANICAL PROPERTIES OF FRICTION-STIR-WELDED SUPER DUPLEX STAINLESS STEEL SAF 2507 [Volume 21, Issue 2, 2024, Pages 93-104]
Ali, A. S. THERMO-MECHANICAL MODEL AND VALIDATION FOR FRICTION STIR WELDING OF SUPER DUPLEX STAINLESS STEEL SAF 2507 [Volume 21, Issue 2, 2024, Pages 79-92]
Ali, Eman M. MECHANICAL AND TRIBOLOGICAL PROPERTIES OF POLYMETHYL METHACRYLATE MATRIX REINFORCED WITH NOVEL HYBRID ORGANIC AND INORGANIC NANO-FILLERS. [Volume 20, Issue 3, 2023, Pages 40-62]
Ali, M. CONDITION MONITORING OF LOCALIZED OUTER RACE DEFECTS OF TAPER ROLLER BEARINGS USING VIBRATION ANALYSIS [Volume 20, Issue 1, 2023, Pages 51-62]
Ali, W. A. FRICTION COEFFICIENT DISPLAYED BY RUBBER SLIDING AGAINST FLOORING TILES [Volume 9, Issue 4, 2012, Pages 28-39]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED FROM SLIDING ON POLYETHYLENE TURF [Volume 17, Issue 1, 2020, Pages 1-13]
Ali, W. Y. INCREASING FRICTION COEFFICIENT DISPLAYED BY SLIDING BETWEEN THE FOOTBALL AND THE GLOVES OF THE GOALKEEPER [Volume 16, Issue 3, 2019, Pages 15-25]
Ali, W. Y. PROPER SELECTION OF POLYMERIC FIBERS REINFORCING EPOXY [Volume 16, Issue 3, 2019, Pages 26-35]
Ali, W. Y. ABRASIVE WEAR RESISTANCE OF POLYMERS REINFORCED BY SILICON CARBIDE NANOFIBERS [Volume 16, Issue 3, 2019, Pages 36-47]
Ali, W. Y. ENHANCING THE TRIBOLOGICAL PROPERTIES OF BEARINGS IN MANIPULATORS [Volume 17, Issue 1, 2020, Pages 62-72]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF HIGH DENSITY POLYETHYLENE AGAINST AIR BUBBLE SHEET OF LOW DENSITY POLYETHYLENE [Volume 14, Issue 4, 2017, Pages 27-39]
Ali, W. Y. TRIBOLOGICAL PROPERTIES OF LOW DENSITY POLYETHYLENE AND POLYAMIDE 12 AS POLYMER MATRIX NANOCOMPOSITES [Volume 14, Issue 4, 2017, Pages 40-53]
Ali, W. Y. INFLUENCE OF PRE-TRIBOELECTRIFICATION ON FRICTION COEFFICIENT DISPLAYED BY POLYMERIC MATERIALS [Volume 14, Issue 4, 2017, Pages 54-70]
Ali, W. Y. REDUCING ELECTROSTATIC CHARGE GENERATED ON POLYMERIC FLOOR IN HOSPITALS [Volume 14, Issue 3, 2017, Pages 18-33]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF POLYETHYLENE AGAINST POLYTETRAFLUOROETHYLENE [Volume 14, Issue 3, 2017, Pages 34-49]
Ali, W. Y. DEPENDENCY OF FRICTION ON ELECTROSTATIC CHARGE GENERATED ON POLYMERIC SURFACES [Volume 14, Issue 3, 2017, Pages 50-65]
Ali, W. Y. HARDNESS AND WEAR OF POLYMETHYL METHACRYLATE FILLED WITH MULTI- WALLED CARBON NANOTUBES AS DENTURE BASE MATERIALS [Volume 14, Issue 3, 2017, Pages 66-83]
Ali, W. Y. TRIBOELECTRIFICATION OF THE DIAPERS [Volume 14, Issue 2, 2017, Pages 1-15]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED ON FLOOR MATERIAL GROUNDED BY STAINLESS STEEL STRIPS [Volume 14, Issue 2, 2017, Pages 16-27]
Ali, W. Y. EROSION OF GLASS FIBRE REINFORCED EPOXY COMPOSITES [Volume 14, Issue 2, 2017, Pages 28-41]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED ON FLOOR IN HOSPITALS [Volume 14, Issue 1, 2017, Pages 1-14]
Ali, W. Y. REDUCING ELECTROSTATIC CHARGE GENERATED FROM SLIDING AGAINST POLYMERIC FLOOR IN HOSPITALS [Volume 14, Issue 1, 2017, Pages 15-30]
Ali, W. Y. FRICTION BEHAVIOR OF HYBRID COMPOSITES FILLED BY TITANIUM DIOXIDE NANOPARTICLES [Volume 14, Issue 1, 2017, Pages 40-50]
Ali, W. Y. TRIBOLOGICAL BEHAVIOR OF EPOXY REINFORCED WITH CARBON NANOTUBES AND FILLED BY VEGETABLES OILS [Volume 14, Issue 1, 2017, Pages 51-61]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED FROM THE SLIDING OF THE FOOTBALL ON THE GLOVES OF THE GOALKEEPER [Volume 13, Issue 4, 2016, Pages 41-52]
Ali, W. Y. FRICTION MATERIALS REINFORCED BY PALM FIBRES [Volume 13, Issue 4, 2016, Pages 53-64]
Ali, W. Y. FRICTION COEFFICIENT DISPLAYED BY SLIDING THE FOOTBALL ON THE GLOVES OF THE GOALKEEPER [Volume 13, Issue 3, 2016, Pages 21-33]
Ali, W. Y. WEAR RESISTANCE OF STEEL COATED BY POLYURETHANE REINFORCED BY STEEL WIRES [Volume 13, Issue 3, 2016, Pages 46-56]
Ali, W. Y. SELECTION OF WORKING GLOVES BASED ON FRICTION COEFFICIENT [Volume 13, Issue 2, 2016, Pages 1-14]
Ali, W. Y. PROPER SELECTION OF FOOT WEARING SOCKS TEXTILES BASED ON FRICTION COEFFICIENT DISPLAYED BY SLIDING AGAINST INDOOR FLOORS [Volume 13, Issue 2, 2016, Pages 15-24]
Ali, W. Y. EFFECT OF CURING PROCESS OF DENTAL NANOCOMPOSITE RESIN ON SHORE HARDNESS [Volume 13, Issue 2, 2016, Pages 25-37]
Ali, W. Y. FRICTION COEFFICIENT AND WEAR DISPLAYED BY THE SCRATCH OF POLYPROPYLENE REINFORCED BY COPPER WIRES [Volume 13, Issue 2, 2016, Pages 38-49]
Ali, W. Y. EROSION BEHAVIOR OF EPOXY COMPOSITES REINFORCED BY GLASS FIBRE AND FILLED BY SYNTHETIC OIL [Volume 13, Issue 2, 2016, Pages 50-59]
Ali, W. Y. PROPER SELECTION OF INDOOR FLOOR BASED ON FRICTION COEFICIENT AND ELECTRIC STATIC CHARGE [Volume 13, Issue 1, 2016, Pages 1-14]
Ali, W. Y. THE TRIBOLOGICAL BEHAVIOR OF POLYETHYLENE FILLED BY NANOPOWDER OF ALUMINUM OXIDE [Volume 13, Issue 1, 2016, Pages 15-29]
Ali, W. Y. WEAR OF POLYVINYL CHLORIDE FILLED BY NANOPARTICLES OF ALUMINUM OXIDE [Volume 13, Issue 1, 2016, Pages 30-42]
Ali, W. Y. TRIBOLOGICAL PROPERTIES OF EPOXY COMPOSITES [Volume 13, Issue 1, 2016, Pages 53-62]
Ali, W. Y. TRIBOELECTRIFICATION OF SHOE COVER AND FLOOR IN HOSPITALS [Volume 12, Issue 4, 2015, Pages 1-14]
Ali, W. Y. FRICTION COEFFICIENT AND WEAR DISPLAYED BY THE SCRATCH OF POLYETHYLENE REINFORCED BY COPPER WIRES [Volume 12, Issue 4, 2015, Pages 15-27]
Ali, W. Y. FRICTION COEFFICIENT DISPLAYED BY SLIDING OF RUBBER SOLE AGAINST RECYCLED RUBBER FLOORING TILES [Volume 12, Issue 4, 2015, Pages 28-39]
Ali, W. Y. EFFECT OF ELECTRIC STATIC CHARGE ON FRICTION COEFFICIENT DISPLAYED BY SLIDING OF RUBBER SOLE AGAINST EPOXY FLOOR REINFORCED BY COPPER WIRES [Volume 12, Issue 4, 2015, Pages 40-52]
Ali, W. Y. COMPARATIVE PERFORMANCE OF FRICTION COEFFICIENT DISPLAYED BY POLYMERS FILLED BY VEGETABLES OILS [Volume 12, Issue 4, 2015, Pages 53-66]
Ali, W. Y. TRIBOELECTRIFICATION OF SHOE SOLES AND FLOOR IN HOSPITALS [Volume 12, Issue 3, 2015, Pages 1-14]
Ali, W. Y. EFFECT OF LUBRICATING ADDITIVES ON THE PERFORMANCE OF ROLLING BEARINGS [Volume 12, Issue 3, 2015, Pages 15-27]
Ali, W. Y. ELECTRIC STATIC CHARGE GENERATED FROM SLIDING OF EPOXY COMPOSITES REINFORCED BY COPPER WIRES AGAINST RUBBER [Volume 12, Issue 3, 2015, Pages 28-39]
Ali, W. Y. INCREASING THE SAFETY OF WALKING AGAINST EPOXY FLOORINGS REINFORCED BY METALLIC WIRES [Volume 12, Issue 3, 2015, Pages 40-54]
Ali, W. Y. ELECTROSTATIC CHARACTERISTICS OF COPPER WIRES REINFORCED EPOXY MATRIX COMPOSITES [Volume 12, Issue 2, 2015, Pages 55-68]
Ali, W. Y. TRIBOELECTRIFICATION OF POLYMERIC TEXTILES [Volume 12, Issue 1, 2015, Pages 26-36]
Ali, W. Y. INFLUENCE OF INDUCTION MAGNETIC FIELD ON FRICTION COEFFICIENT OF STEEL SLIDING AGAINST OIL LUBRICATED POLYMERS [Volume 12, Issue 1, 2015, Pages 37-48]
Ali, W. Y. FRICTION COEFFICIENT AND ELECTROSTATIC CHARGE GENERATED FROM RUBBER FOOTWEAR SLIDING AGAINST FLOORING MATERIALS [Volume 11, Issue 4, 2014, Pages 13-24]
Ali, W. Y. REDUCING ELECTRIC STATIC CHARGE GENERATED FROM EPOXY FLOORING MATERIALS [Volume 11, Issue 4, 2014, Pages 25-35]
Ali, W. Y. FRICTION COEFFICIENT OF GROOVED RUBBER DISC SLIDING AGAINST CERAMICS: III. EFFECT OF THE GROOVES [Volume 11, Issue 3, 2014, Pages 1-18]
Ali, W. Y. FRICTION COEFFICIENT DISPLAYED BY POLYAMIDE FILLED BY VEGETABLES OILS [Volume 11, Issue 3, 2014, Pages 34-45]
Ali, W. Y. EFFECT OF SAND ON THE FRICTION COEFFICIENT DISPLAYED BY RUBBER SLIDING AGAINST EPOXY FLOORINGSFILLED BY IRONNANOPARTICLES [Volume 11, Issue 3, 2014, Pages 46-57]
Ali, W. Y. FRICTION COEFFICIENT DISPLAYED BY FOOT SLIDING ON THE SURFACE OF SKATEBOARD [Volume 11, Issue 3, 2014, Pages 60-68]
Ali, W. Y. FRICTION COEFFICIENT OF GROOVED RUBBER DISC SLIDING AGAINST CERAMICS: I. EFFECT OF MOTION DIRECTION [Volume 11, Issue 2, 2014, Pages 1-20]
Ali, W. Y. FRICTION COEFFICIENT OF GROOVED RUBBER DISC SLIDING AGAINST CERAMICS: II. EFFECT OF LOAD [Volume 11, Issue 2, 2014, Pages 21-38]
Ali, W. Y. FRICTIONAL BEHAVIOUR OF RUBBER FLOORING MAT FITTED BY RECTANGULAR TREADS [Volume 11, Issue 2, 2014, Pages 39-52]
Ali, W. Y. ABRASIVE WEAR OF POLYESTER COMPOSITES [Volume 11, Issue 2, 2014, Pages 63-72]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED FROM BARE FOOT AND FOOT WEAR SLIDING AGAINST FLOORING MATERIALS [Volume 11, Issue 1, 2014, Pages 1-11]
Ali, W. Y. ELECTRIC STATIC CHARGE GENERATED FROM THE SLIDING OF POLYMERS AGAINST STAINLESS STEEL [Volume 11, Issue 1, 2014, Pages 24-34]
Ali, W. Y. TRIBOLOGICAL BEHAVOUR OF HEAT TREATED HOT WORK STEELS [Volume 11, Issue 1, 2014, Pages 35-45]
Ali, W. Y. INFLUENCE OF HEAT TREATMENT ON THE FRICTION AND WEAR OF POLYURETHANE COATINGS [Volume 11, Issue 1, 2014, Pages 46-57]
Ali, W. Y. INCREASING THE SAFETY OF WALKING ON RUBBER FLOOR MAT [Volume 10, Issue 4, 2013, Pages 1-14]
Ali, W. Y. DRY AND WATER WETTED SLIDING OF RUBBER ON EPOXY FLOORING FILLED BY THERMOPLASTIC POLYMERS [Volume 10, Issue 4, 2013, Pages 29-39]
Ali, W. Y. FRICTION AND TRIBOELECTRIFICATION OF EPOXY FLOORINGS FILLED BY ALUMINIUM OXIDE NANOPARTICLES [Volume 10, Issue 4, 2013, Pages 40-57]
Ali, W. Y. FRICTION COEFICIENT OF SEMI-SPHERICAL RUBBER PROTRUSIONS SLIDING AGAINST RUBBER [Volume 10, Issue 3, 2013, Pages 1-12]
Ali, W. Y. TEMPER COLOURS OF WEAR PARTICLES [Volume 10, Issue 3, 2013, Pages 41-50]
Ali, W. Y. TRIBOLOGICAL BEHAVOUR OF HEAT TREATED COLD WORK STEELS [Volume 10, Issue 3, 2013, Pages 51-62]
Ali, W. Y. TRIBOELECTRIFICATION OF METALLIC SURFACES LUBRICATED BY USED OILS [Volume 10, Issue 2, 2013, Pages 12-27]
Ali, W. Y. ELECTRIC STATIC CHARGE GENERATED FROM THE FRICTION OF TEXTILES [Volume 10, Issue 2, 2013, Pages 46-56]
Ali, W. Y. EFFECT OF FILLING MATERIALS ON THE FRICTION COEFFICIENT OF RECYCLED RUBBER FLOORINGS [Volume 10, Issue 1, 2013, Pages 1-12]
Ali, W. Y. EFFECT OF SURFACE ROUGHNESS ON FRICTION COEFFICIENT OF RECYCLED RUBBER FLOORINGS [Volume 10, Issue 1, 2013, Pages 12-25]
Ali, W. Y. EFFECT OF TIP RADIUS OF THE INDENTERS ON FRICTION COEFFICIENT OF THE SCRATCHED METALLIC SHEETS [Volume 10, Issue 1, 2013, Pages 26-37]
Ali, W. Y. FRICTION COEFFICIENT OF RECYCLED RUBBER TILES OF DIFFERENT POROSITY [Volume 10, Issue 1, 2013, Pages 38-49]
Ali, W. Y. EFFECT OF MAGNETIC FIELD ON THE FRICTION AND WEAR DISPLAYED BY THE SCRATCH OF OIL LUBRICATED STEEL [Volume 9, Issue 4, 2012, Pages 12-27]
Ali, W. Y. INFLUENCE OF HEAT TREATMENT ON FRICTION AND WEAR OF DUCTILE IRON: ROLE OF CHROMIUM AND NICKEL [Volume 9, Issue 4, 2012, Pages 40-54]
Ali, W. Y. EFFECT OF FILLING MATERIALS ON THE FRICTION COEFFICIENT OF RECYCLED RUBBER FLOORINGS [Volume 9, Issue 4, 2012, Pages 55-66]
Ali, W. Y. SAND EROSION TESTING OF POLYMERIC COATINGS OF STEEL SHEETS [Volume 9, Issue 3, 2012, Pages 40-52]
Ali, W. Y. FRICTION COEFFICIENT OF SMOOTH AND ROUGH RECYCLED RUBBER FLOORING TILES [Volume 9, Issue 3, 2012, Pages 53-65]
Ali, W. Y. FRICTION COEFFICIENT AND ELECTRIC STATIC CHARGE OF HEAD SCARF TEXTILES [Volume 9, Issue 3, 2012, Pages 24-39]
Ali, W. Y. INFLUENCE OF MAGNETIC FIELD ON THE FRICTION AND WEAR CAUSED BY THE SCRATCH OF OIL LUBRICATED HIGH DENSITY POLYETHYLENE [Volume 9, Issue 2, 2012, Pages 1-14]
Ali, W. Y. INFLUENCE OF MAGNETIC FIELD ON THE ACTION MECHANISM OF LUBRICANT ADDITIVES [Volume 9, Issue 2, 2012, Pages 15-28]
Ali, W. Y. INFLUENCE OF MAGNETIC FIELD ON FRICTION COEFFICIENT DISPLAYED BY THE OIL LUBRICATED SLIDING OF STEEL [Volume 9, Issue 2, 2012, Pages 29-42]
Ali, W. Y. DRY SLIDING OF POLYESTER COMPOSITES FILLED BY NANOPARTICLES AGAINST STEEL [Volume 9, Issue 2, 2012, Pages 43-59]
Ali, W. Y. OIL LUBRICATED SLIDING OF POLYESTER COMPOSITES FILLED BY NANOPARTICLES AGAINST STEEL [Volume 9, Issue 2, 2012, Pages 60-76]
Ali, W. Y. CHARACTERIZATION OF SOLID PARTICLES CONTAMINATING AUTOMOTIVE OILS BY FERROGRAPHIC EXAMINATION [Volume 9, Issue 1, 2012, Pages 1-11]
Ali, W. Y. PREVENTION OF SLIP ACCIDENTS BY USING RUBBER FLOOR MAT [Volume 9, Issue 1, 2012, Pages 24-38]
Ali, W. Y. INFLUENCE OF MAGNETIC FIELD ON THE SLIDING OF STEEL AGAINST LUBRICATED POLYAMIDE [Volume 9, Issue 1, 2012, Pages 39-51]
Ali, W. Y. INFLUENCE OF HEAT TREATMENT ON FRICTION AND WEAR OF UNALLOYED DUCTILE IRON [Volume 9, Issue 1, 2012, Pages 52-64]
Ali, W. Y. FRICTION COEFFICIENT OF RUBBER SLIDING AGAINST FLOORING MATERIALS [Volume 8, Issue 4, 2011, Pages 1-11]
Ali, W. Y. FRICTION AND WEAR OF MOVING SURFACES IN ABRASIVE CONTAMINATED ENVIRONMENT [Volume 8, Issue 4, 2011, Pages 25-34]
Ali, W. Y. FRICTION COEFFICIENT BETWEEN CLOTHES AND CAR SEAT COVERS [Volume 8, Issue 4, 2011, Pages 36-47]
Ali, W. Y. INFLUENCE OF BRUSHING FORCE ON ABRASIVE WEAR OF TEETH [Volume 8, Issue 4, 2011, Pages 48-59]
Ali, W. Y. INSPECTION OF WEAR PARTICLES RETAINED BY THE OIL FILTERS OF AUTOMOTIVE ENGINES [Volume 8, Issue 3, 2011, Pages 15-26]
Ali, W. Y. EFFECT OF MAGNETIC FIELD ON FRICTION COEFFICIENT DISPLAYED BY ROLLING BEARINGS [Volume 8, Issue 3, 2011, Pages 27-39]
Ali, W. Y. RECYCLING OF THERMOPLASTIC POLYMERS BY FILLING EPOXY FLOORING MATERIALS [Volume 8, Issue 3, 2011, Pages 40-53]
Ali, W. Y. EFFECT OF POLYMERS DISPERSING LUBRICATING GREASES ON WEAR IN DUSTY ENVIRONMENT [Volume 8, Issue 3, 2011, Pages 54-64]
Ali, W. Y. EFFECT OF MAGNETIC FIELD ON FRICTION AND WEAR OF STEEL [Volume 8, Issue 2, 2011, Pages 1-15]
Ali, W. Y. EFFECT OF MAGNETIC FIELD ON FRICTION AND WEAR OF BRASS [Volume 8, Issue 2, 2011, Pages 16-30]
Ali, W. Y. FRICTION COEFFICIENT DISPLAYED BY FOOTWEAR WALKING AGAINST RUBBER FLOORING FITTED BY CYLINDRICAL TREADS [Volume 8, Issue 1, 2011, Pages 1-14]
Ali, W. Y. FRICTIONAL BEHAVIOUR OF BARE FOOT AND RUBBER FOOTWEAR SOLE SLIDING AGAINST POLYPROPYLENE BRAKE PEDAL PADS [Volume 8, Issue 1, 2011, Pages 28-39]
Ali, W. Y. FRICTION AND WEAR OF AUTOMOTIVE FRICTION MATERIALS [Volume 8, Issue 1, 2011, Pages 40-52]
Ali, W. Y. FADE AND TEMPERATURE RISE OF AUTOMOTIVE FRICTION MATERIALS [Volume 8, Issue 1, 2011, Pages 53-64]
Ali, W. Y. FRICTION COEFFICIENT OF RUBBER SLIDING AGAINST DUSTY INDOOR FLOORING [Volume 7, Issue 4, 2010, Pages 11-26]
Ali, W. Y. FRICTION BETWEEN FOOT, SOCKS AND INSOLES [Volume 7, Issue 4, 2010, Pages 27-39]
Ali, W. Y. DETERMINING THE OPERATING TIME OF THE ENGINE OILS [Volume 7, Issue 4, 2010, Pages 40-51]
Ali, W. Y. EFFECT OF HEAT TREATMENT ON THE ABRASION RESISTANCE OF THERMOPLASTIC POLYMERS [Volume 7, Issue 4, 2010, Pages 52-64]
Ali, W. Y. FRICTION COEFFICIENT OF RUBBER SLIDING AGAINST DUSTY INDOOR FLOORING [Volume 7, Issue 2, 2010, Pages 11-25]
Ali, W. Y. FRICTION BETWEEN FOOT, SOCKS AND INSOLES [Volume 7, Issue 2, 2010, Pages 26-38]
Ali, W. Y. ABRASIVE WEAR OF INTERNAL COMBUSTION ENGINES [Volume 7, Issue 1, 2010, Pages 1-13]
Ali, W. Y. ABRASION RESISTANCE OF RECYCLED POLYMERIC COATING [Volume 7, Issue 1, 2010, Pages 14-25]
Ali, W. Y. EXPERIMENTAL STUDY OF ABRASIVE WEAR RESISTANT POLYESTER COMPOSITES [Volume 7, Issue 1, 2010, Pages 26-35]
Ali, W. Y. WEAR RESISTANCE OF THERMOPLASTIC COATINGS [Volume 7, Issue 1, 2010, Pages 36-49]
Ali, W. Y. EFFECT OF POLYMERIC POWDER ON THE FRICTION AND WEAR OF SAND CONTAMINATED GREASED SURFACES [Volume 7, Issue 1, 2010, Pages 50-60]
Ali, W. Y. REDUCING THE ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON POLYETHYLENE ARTIFICIAL TURF [Volume 17, Issue 2, 2020, Pages 40-49]
Ali, W. Y. EFFECT OF BLENDING POLYETHYLENE TURF BY POLYMETHYL METHACRYLATE AND POLYAMIDE ON GENERATION OF ELECTROSTATIC CHARGE [Volume 17, Issue 2, 2020, Pages 50-60]
Ali, W. Y. INFLUENCE OF BLENDING POLYETHYLENE TURF BY COPPER TEXTILE ON GENERATION OF ELECTROSTATIC CHARGE [Volume 17, Issue 3, 2020, Pages 14-25]
Ali, W. Y. TRIBOLOGICAL PROPERTIES OF POLYMERIC MATERIALS LUBRICATED BY SAND CONTAMINATED WATER [Volume 17, Issue 3, 2020, Pages 26-36]
Ali, W. Y. EFFECT OF BLENDING POLYETHYLENE TURF BY CONDUCTING MATERIALS ON ELECTROSTATIC CHARGE GENERATED FROM FRICTION [Volume 17, Issue 3, 2020, Pages 59-71]
Ali, W. Y. EFFECT OF CONDUCTING MATERIALS ON ELECTROSTATIC CHARGE GENERATED FROM SLIDING ON POLYETHYLENE TURF [Volume 17, Issue 3, 2020, Pages 48-58]
Ali, W. Y. SLIDING OF POLYETHYLENE COMPOSITES ON ARTIFICIAL TURF [Volume 17, Issue 4, 2020, Pages 12-22]
Ali, W. Y. ENHANCING THE FRICTIONAL PERFORMANCE OF SPORT GLOVES [Volume 17, Issue 4, 2020, Pages 23-33]
Ali, W. Y. PROPER MATERIAL SELECTION OF MEDICAL GLOVES [Volume 17, Issue 4, 2020, Pages 1-11]
Ali, W. Y. STUDY OF ALUMINUM TUBE COLD NOSING PROCESS INTO CONICAL AND HEMI-SPHERICAL DIES WITH DIFFERENT COEFFICIENTS OF FRICTION [Volume 17, Issue 4, 2020, Pages 55-69]
Ali, W. Y. EFFECT OF DISPERSING LITHIUM GREASE BY ALUMINUM OXIDE NANOPARTICLES AND CARBON NANOTUBES [Volume 17, Issue 4, 2020, Pages 34-43]
Ali, W. Y. WEAR BEHAVIOR OF CERVICAL FUSION PLATES FABRICATED FROM POLYETHYLENE REINFORCED BY KEVLAR AND CARBON FIBERS [Volume 18, Issue 1, 2021, Pages 8-17]
Ali, W. Y. INVESTIGATION OF FRICTION COEFFICIENT OF THE SURFCAE OF ROBOTIC GRIPPER [Volume 18, Issue 1, 2021, Pages 29-39]
Ali, W. Y. SELECTION OF FLOOR MATERIALS IN HOSPITALS TO RESIST COVID-19 [Volume 18, Issue 1, 2021, Pages 40-51]
Ali, W. Y. TRIBOELECTRIFIED MATERIALS OF FACEMASK TO RESIST COVID-19 [Volume 18, Issue 1, 2021, Pages 52-62]
Ali, W. Y. PROPER MATERIAL SELECTION OF MEDICAL SAFETY GOGGLES [Volume 18, Issue 2, 2021, Pages 1-14]
Ali, W. Y. ELECTROSTATIC CHARGES GENERATED ON THE MEDICAL CLOTHES [Volume 18, Issue 2, 2021, Pages 15-26]
Ali, W. Y. TRIBOLOGICAL BEHAVIOR OF ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE NANOCOMPOSITES [Volume 18, Issue 2, 2021, Pages 27-41]
Ali, W. Y. INFLUENCE OF ELECTROSTATIC CHARGE ON FRICTION OF GRIPPER IN HANDLING MATERIAL [Volume 18, Issue 2, 2021, Pages 63-74]
Ali, W. Y. FRICTION DISPLAYED BY THE SLIDING OF RUBBER ON EPOXY FILLED BY RECYCLED RUBBER PARTICLES [Volume 18, Issue 3, 2021, Pages 1-10]
Ali, W. Y. TRIBOLOGICAL PERFORMANCE OF LITHIUM GREASE DISPERSED BY SILCA NANO PARTICLES AND CARBON NANOTUBES [Volume 18, Issue 3, 2021, Pages 23-34]
Ali, W. Y. PROPSED MATERIALS FOR FACE MASKS [Volume 18, Issue 3, 2021, Pages 35-41]
Ali, W. Y. PROPER SELECTION MATERIALS OF FACE SHIELDS, EYEGLASSES AND GOGGLES [Volume 18, Issue 3, 2021, Pages 42-51]
Ali, W. Y. CONTROL OF FRICTION TO ADAPT GRIP FORCE BY ELECTROSTATIC CHARGE [Volume 18, Issue 3, 2021, Pages 52-58]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED FROM FABRICS SLIDING ON POLYMERIC MATERIALS [Volume 18, Issue 3, 2021, Pages 59-66]
Ali, W. Y. SELECTION OF THE PROPER MATERIALS FOR MEDICAL FACEMASK [Volume 18, Issue 4, 2021, Pages 14-24]
Ali, W. Y. ENHANCING THE PERFORMANCE OF THE MEDICAL FACEMASK [Volume 18, Issue 4, 2021, Pages 25-36]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON EPOXY FILLED BY RECYCLED RUBBER GRANULATES [Volume 18, Issue 4, 2021, Pages 45-54]
Ali, W. Y. EFFECT OF DISPERSING LITHIUM GREASE BY CLAY PARTICLES [Volume 18, Issue 4, 2021, Pages 55-65]
Ali, W. Y. DEVELOPING THE PERFORMANCE OF THE MEDICAL FACEMASK TO RESIST COVID-19 [Volume 19, Issue 1, 2022, Pages 1-13]
Ali, W. Y. HARDNESS AND FRICTIONAL BEHAVIOUR OF DENTAL HYBRID COMPOSITE RESIN FILLED BY SILICON CARBIDE NANOFIBERS [Volume 19, Issue 1, 2022, Pages 28-40]
Ali, W. Y. WEAR BEHAVIOUR OF DENTAL RESIN REINFORCED BY SILICON CARBIDE NANOFIBERS [Volume 19, Issue 1, 2022, Pages 41-54]
Ali, W. Y. EFFECT OF ELECTRIC CURRENT ON THE TRIBOLOGICAL PROPERTIES OF LITHIUM GREASE DISPERSED BY SILICA NANO PARTICLES AND CARBON NANOTUBES [Volume 19, Issue 1, 2022, Pages 83-96]
Ali, W. Y. INCREASING THE EFFICIENCY OF THE MEDICAL FACEMASK TO RESIST COVID-19 [Volume 19, Issue 2, 2022, Pages 1-11]
Ali, W. Y. INVESTIGATION OF THE ELECTROSTATIC CHARGE GENERATED FROM FABRICS SLIDING ON PMMA / HDPE COMPOSITES [Volume 19, Issue 2, 2022, Pages 12-23]
Ali, W. Y. TRIBOLOGICAL PERFORMANCE OF EPOXY FLOOR FILLED BY RECYCLED RUBBER PARTICLES [Volume 19, Issue 4, 2022, Pages 1-10]
Ali, W. Y. FRICTIONAL AND ELECTROSTATIC CHARGE PROPERTIES OF TEXTILE MATERIALS [Volume 19, Issue 4, 2022, Pages 11-18]
Ali, W. Y. INFLUENCE OF MULTI-WALLED CARBON NANOTUBES CONTENT ON THE MECHANICAL PROPERTIES OF COLD AND HOT CURED ACRYLIC RESIN FOR DENTURE BASE. [Volume 19, Issue 4, 2022, Pages 41-53]
Ali, W. Y. REDUCING THE ELECTROSTATIC DISCHARGE GENERATED FROM THE CONTACT AND SEPARATION AS WELL AS SLIDING OF POLYMERIC TEXTILES ON COTTON [Volume 19, Issue 4, 2022, Pages 54-62]
Ali, W. Y. CONTACT AND SEPARATION OF KAPTON AND POLYMETHYLMETHACRYLATE TRIBOELECTRIC NANOGENERATOR [Volume 19, Issue 4, 2022, Pages 63-74]
Ali, W. Y. TRIBOLOGICAL PROPERTIES OF HIGH DENSITY POLYETHYLENE FILLED BY GRAPHENE OXIDE NANO PARTICLES [Volume 20, Issue 1, 2023, Pages 1-10]
Ali, W. Y. MECHANICAL PROPERTIES OF HIGH DENSITY POLYETHYLENE FILLED BY GRAPHENE OXIDE NANO PARTICLES [Volume 20, Issue 1, 2023, Pages 11-21]
Ali, W. Y. EFFECT OF REINFORCING POLYPROPYLENE BY STEEL WIRES ON FRICTION COEFFICIENT AND WEAR [Volume 20, Issue 1, 2023, Pages 22-31]
Ali, W. Y. TRIBOELECTRIC NANOGENERATOR BASED ON CONTACT AND SEPARATION AS WELL AS SLIDING OF POLYAMIDE ON POLYTETRAFLUOROETHELENE [Volume 20, Issue 1, 2023, Pages 32-40]
Ali, W. Y. ENHANCING THE EFFICIENCY OF TRIBOELECTRIC NANOGENERATOR BY ELECTROSTATIC INDUCTION [Volume 20, Issue 1, 2023, Pages 41-50]
Ali, W. Y. WEAR OF HIGH DENSITY POLYETHYLENE REINFORCED BY SINGLE WALL CARBON NANOTUBES AND ALUMINIUM OXIDE NANOPARTICLES FOR BEARING MATERIALS APPLICATIONS [Volume 20, Issue 1, 2023, Pages 63-73]
Ali, W. Y. TRIBOELECTRIC NANOGENERATOR BASED ON TRIBOELECTRIFICATION AND MAGNETIC FIELD [Volume 20, Issue 2, 2023, Pages 1-12]
Ali, W. Y. PERFORMANCE OF TRIBOELECTRIC NANOGENERATOR ENHANCED BY ELECTROSTATIC INDUCTION [Volume 20, Issue 2, 2023, Pages 13-22]
Ali, W. Y. ENHANCING THE PERFORMANCE AND COMFORT OF POLYMERIC TEXTILES [Volume 20, Issue 2, 2023, Pages 48-56]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED FROM THE CONTACT-SEPARATION AND SLIDING OF POLYAMIDE AND POLYESTER STRINGS BLENDED BY CARBON FIBERS ON COTTON [Volume 20, Issue 2, 2023, Pages 66-76]
Ali, W. Y. ELECTRONIC SKIN BASED ON TRIBOELECTRIFICATION AND ELECTROSTATIC INDUCTION [Volume 20, Issue 2, 2023, Pages 77-86]
Ali, W. Y. PROPER SELECTION OF TEXTILES BASED ON ELECTROSTATIC CHARGE GENERATED FROM THEIR CONTACT-SEPARATION AND SLIDING ON WOOL FIBERS [Volume 20, Issue 3, 2023, Pages 1-11]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED FROM THE CONTACT-SEPARATION AND SLIDING OF RAYON/POLYESTER TEXTILES ON WOOL [Volume 20, Issue 3, 2023, Pages 12-22]
Ali, W. Y. EFFECT OF CALCIUM CARBONATE CONTENT ON THE SURFACE VOLTAGE GENERATED BY ROCKS [Volume 20, Issue 3, 2023, Pages 75-84]
Ali, W. Y. EFFECT OF MAGNETIC FIELD ON THE VOLTAGE OUTPUT OF TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 3, 2023, Pages 85-94]
Ali, W. Y. WIND SPEED SENSOR BASED ON SLIDING TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 4, 2023, Pages 106-116]
Ali, W. Y. REDUCING ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON PROPOSED ARTIFICIAL TURF [Volume 21, Issue 1, 2024, Pages 1-11]
Ali, W. Y. INFLUENCE OF MAGNETIC FIELD ON THE PERFORMANCE OF THE TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 1, 2024, Pages 12-23]
Ali, W. Y. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON EPOXY FILLED BY NATURAL FIBERS [Volume 21, Issue 1, 2024, Pages 120-133]
Ali, W. Y. DEVELOPMENT OF ELECTRONIC SKIN BASED ON BIDIRECTIONAL DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 1, 2024, Pages 134-144]
Ali, W. Y. DEVELOPMENT OF DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 2, 2024, Pages 1-14]
Ali, W. Y. FIBER REINFORCED POLYMER MATRIX COMPOSITES FOR ORTHOPAEDIC IMPLANTS [Volume 21, Issue 2, 2024, Pages 39-52]
Ali, W. Y. FACTORS AFFECTING THE COEFFICIENT OF FRICTION IN A DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 2, 2024, Pages 53-61]
Ali, W. Y. FRICTION AND WEAR DISPLAYED BY THE SCRATCH OF EPOXY REINFORCED BY NATURAL FIBERS [Volume 21, Issue 2, 2024, Pages 62-70]
Ali, W. Y. FRICTION COEFFICIENT DISPLAYED BY SLIDING RUBBER ON EPOXY REINFORCED BY NATURAL FIBERS [Volume 21, Issue 2, 2024, Pages 71-78]
Ali, W. Y. EFFECT OF ADDITIVES ON THE TRIBOLOGICAL BEHAVIOR OF GLYCERIN-MOTOR OIL BLENDS [Volume 21, Issue 2, 2024, Pages 120-128]
Ali, Y. A. FRICTION AND WEAR OF POLYMERIC MATERIALS REINFORCED BY CARBON NANOTUBES [Volume 14, Issue 4, 2017, Pages 1-14]
Ali, Y. A. FRICTION AND WEAR OF POLYMERIC MATERIALS FILLED BY OIL AND REINFORCED BY NANOCARBON TUBES [Volume 14, Issue 4, 2017, Pages 15-26]
Al-Kabbany, A. M. REDUCING THE ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON POLYETHYLENE ARTIFICIAL TURF [Volume 17, Issue 2, 2020, Pages 40-49]
Al-Kabbany, A. M. TRIBOELECTRIFIED MATERIALS OF FACEMASK TO RESIST COVID-19 [Volume 18, Issue 1, 2021, Pages 52-62]
Al-Kabbany, A. M. PROPER MATERIAL SELECTION OF MEDICAL SAFETY GOGGLES [Volume 18, Issue 2, 2021, Pages 1-14]
Al-Kabbany, A. M. PROPSED MATERIALS FOR FACE MASKS [Volume 18, Issue 3, 2021, Pages 35-41]
Al-Kabbany, A. M. PROPER SELECTION MATERIALS OF FACE SHIELDS, EYEGLASSES AND GOGGLES [Volume 18, Issue 3, 2021, Pages 42-51]
Al-Kabbany, A. M. CONTACT AND SEPARATION OF KAPTON AND POLYMETHYLMETHACRYLATE TRIBOELECTRIC NANOGENERATOR [Volume 19, Issue 4, 2022, Pages 63-74]
Al-Kabbany, A. M. PROPER MATERIAL SELECTION FOR A TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 2, 2023, Pages 57-65]
Al-Kabbany, A. M. EFFECT OF CALCIUM CARBONATE CONTENT ON THE SURFACE VOLTAGE GENERATED BY ROCKS [Volume 20, Issue 3, 2023, Pages 75-84]
Al-Kabbany, A. M. EFFECT OF MAGNETIC FIELD ON THE VOLTAGE OUTPUT OF TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 3, 2023, Pages 85-94]
Al-Kabbany, A. M. WIND SPEED SENSOR BASED ON SLIDING TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 4, 2023, Pages 106-116]
Al-Kabbany, A. M. INFLUENCE OF MAGNETIC FIELD ON THE PERFORMANCE OF THE TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 1, 2024, Pages 12-23]
Al-Kabbany, A. M. DEVELOPMENT OF ELECTRONIC SKIN BASED ON BIDIRECTIONAL DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 1, 2024, Pages 134-144]
Al-Kabbany, A. M. DEVELOPMENT OF DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 2, 2024, Pages 1-14]
Al-Kabbany, A. M. FACTORS AFFECTING THE COEFFICIENT OF FRICTION IN A DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 2, 2024, Pages 53-61]
Al-Kabbany, A. M. EFFECT OF ADDITIVES ON THE TRIBOLOGICAL BEHAVIOR OF GLYCERIN-MOTOR OIL BLENDS [Volume 21, Issue 2, 2024, Pages 120-128]
Allam, Sabry DESIGN, SIMULATION AND CONTROL OF A NOVEL HYDRAULIC BRAKING SYSTEM [Volume 21, Issue 2, 2024, Pages 15-38]
Al-Osaimy, A. S. FRICTION COEFFICIENT DISPALYED BY SLIDING SURFACES LUBRICATED BY SAND CONTAMINATED OIL [Volume 11, Issue 4, 2014, Pages 1-12]
Al-Osaimy, A. S. THE STRIBECK CURVE AND LUBRICATION CONDITIONS OF METALLIC AND POLYMERIC MATERIALS [Volume 10, Issue 2, 2013, Pages 1-11]
Al-Osaimy, A. S. FRICTION COEFFICIENT AND ELECTRIC STATIC CHARGE OF HEAD SCARF TEXTILES [Volume 9, Issue 3, 2012, Pages 24-39]
Al-Osaimy, A. S. EFFECT OF MAGNETIC FIELD ON THE PERFORMANCE OF VEGETABLES OILS DISPERSED BY POLYMERIC PARTICLES [Volume 8, Issue 4, 2011, Pages 12-24]
Al-Osaimy, A. S. FRICTION AND WEAR OF MOVING SURFACES IN ABRASIVE CONTAMINATED ENVIRONMENT [Volume 8, Issue 4, 2011, Pages 25-34]
Al-Osaimy, A. S. RECYCLING OF THERMOPLASTIC POLYMERS BY FILLING EPOXY FLOORING MATERIALS [Volume 8, Issue 3, 2011, Pages 40-53]
Al-Osaimy, A. S. EFFECT OF POLYMERS DISPERSING LUBRICATING GREASES ON WEAR IN DUSTY ENVIRONMENT [Volume 8, Issue 3, 2011, Pages 54-64]
Al-Osaimy, A. S. FRICTIONAL BEHAVIOUR OF BARE FOOT AND RUBBER FOOTWEAR SOLE SLIDING AGAINST POLYPROPYLENE BRAKE PEDAL PADS [Volume 8, Issue 1, 2011, Pages 28-39]
AlOtaiby, A. REDUCING ELECTRIC STATIC CHARGE GENERATED FROM EPOXY FLOORING MATERIALS [Volume 11, Issue 4, 2014, Pages 25-35]
AlOtaiby, A. FRICTION COEFFICIENT DISPLAYED BY FOOT SLIDING ON THE SURFACE OF SKATEBOARD [Volume 11, Issue 3, 2014, Pages 60-68]
Al-Qaham, Y. ELECTRIC STATIC CHARGE GENERATED FROM THE FRICTION OF TEXTILES [Volume 10, Issue 2, 2013, Pages 46-56]
Al-Qaham, Y. SAND EROSION TESTING OF POLYMERIC COATINGS OF STEEL SHEETS [Volume 9, Issue 3, 2012, Pages 40-52]
Al-Qaham, Y. G. FRICTION COEFICIENT OF SEMI-SPHERICAL RUBBER PROTRUSIONS SLIDING AGAINST RUBBER [Volume 10, Issue 3, 2013, Pages 1-12]
Al-Turaif, H. ENHANCING THE TRIBOLOGICAL PROPERTIES OF EPOXY RESIN USING TiO2 NANOPARTICLES [Volume 7, Issue 4, 2010, Pages 1-10]
Al-Turaif, H. ENHANCING THE TRIBOLOGICAL PROPERTIES OF EPOXY RESIN USING TiO2 NANOPARTICLES [Volume 7, Issue 2, 2010, Pages 1-10]
AlTwarki, A. FRICTION COEFFICIENT DISPLAYED BY FOOT SLIDING ON THE SURFACE OF SKATEBOARD [Volume 11, Issue 3, 2014, Pages 60-68]
Aly, W. Y. INVESTIGATION OF THE ABRASION RESISTANCE OF ALUMINUM COPPER MAGNESIUM ALLOY [Volume 19, Issue 4, 2022, Pages 19-27]
Aly, W. Y. THE EFFECT OF WELDING FRICTION PARAMETERS ON THE MECHANICAL PROPERTIES OF THE MAINTAINED ANODIC YOK IN THE ALUMINUM INDUSTRY [Volume 20, Issue 3, 2023, Pages 63-74]
Amal, M. SELECTION OF WORKING GLOVES BASED ON FRICTION COEFFICIENT [Volume 13, Issue 2, 2016, Pages 1-14]
Amal, Nassar PHYSICAL AND WEAR RESISTANCE PROPERTIES OF COMPOSITES MADE FROM FIRE CLAY AND RECYCLED POLYSTYRENE [Volume 19, Issue 2, 2022, Pages 48-62]
Amal, Nasser A NEW APPROACH FOR CONTROL SYSTEM OF SOLAR PANELS [Volume 19, Issue 2, 2022, Pages 72-87]
Ameer, A. K. HARDNESS AND WEAR OF POLYMETHYL METHACRYLATE FILLED WITH MULTI- WALLED CARBON NANOTUBES AS DENTURE BASE MATERIALS [Volume 14, Issue 3, 2017, Pages 66-83]
Ameer, A. K. EFFECT OF CONDUCTING MATERIALS ON ELECTROSTATIC CHARGE GENERATED FROM SLIDING ON POLYETHYLENE TURF [Volume 17, Issue 3, 2020, Pages 48-58]
Ameer, A. K. EFFECT OF DISPERSING LITHIUM GREASE BY ALUMINUM OXIDE NANOPARTICLES AND CARBON NANOTUBES [Volume 17, Issue 4, 2020, Pages 34-43]
Ameer, A. K. TRIBOLOGICAL PROPERTIES OF POLYESTER COMPOSITES FILLED BY RECYCLED THERMOPLASTIC POLYMERS [Volume 18, Issue 1, 2021, Pages 18-28]
Ameer, A. K. ELECTROSTATIC CHARGES GENERATED ON THE MEDICAL CLOTHES [Volume 18, Issue 2, 2021, Pages 15-26]
Ameer, A. K. EFFECT OF DISPERSING LITHIUM GREASE BY CLAY PARTICLES [Volume 18, Issue 4, 2021, Pages 55-65]
Ameer, A. K. HARDNESS AND FRICTIONAL BEHAVIOUR OF DENTAL HYBRID COMPOSITE RESIN FILLED BY SILICON CARBIDE NANOFIBERS [Volume 19, Issue 1, 2022, Pages 28-40]
Ameer, A. K. WEAR BEHAVIOUR OF DENTAL RESIN REINFORCED BY SILICON CARBIDE NANOFIBERS [Volume 19, Issue 1, 2022, Pages 41-54]
Ameer, A. K. ENHANCING THE SAFETY OF EPOXY FLOOR MATERIALS BY USING COPPER CHIP [Volume 19, Issue 2, 2022, Pages 88-98]
Ameer, A. K. FRICTIONAL AND ELECTROSTATIC CHARGE PROPERTIES OF TEXTILE MATERIALS [Volume 19, Issue 4, 2022, Pages 11-18]
Ameer, A. K. INFLUENCE OF MULTI-WALLED CARBON NANOTUBES CONTENT ON THE MECHANICAL PROPERTIES OF COLD AND HOT CURED ACRYLIC RESIN FOR DENTURE BASE. [Volume 19, Issue 4, 2022, Pages 41-53]
Ameer, A. K. WEAR OF HIGH DENSITY POLYETHYLENE REINFORCED BY SINGLE WALL CARBON NANOTUBES AND ALUMINIUM OXIDE NANOPARTICLES FOR BEARING MATERIALS APPLICATIONS [Volume 20, Issue 1, 2023, Pages 63-73]
Ameer, A. K. WEAR AND MECHANICAL PERFORMANCE OF HDPE AL2O3 NPS AND CNTS MATRIX AS FRICTIONAL MATERIALS APPLICATIONS [Volume 20, Issue 3, 2023, Pages 109-119]
Ameer, A. K. WIND SPEED SENSOR BASED ON SLIDING TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 4, 2023, Pages 106-116]
Ameer, A. K. INFLUENCE OF MAGNETIC FIELD ON THE PERFORMANCE OF THE TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 1, 2024, Pages 12-23]
Ameer, A. K. FACTORS AFFECTING THE COEFFICIENT OF FRICTION IN A DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 2, 2024, Pages 53-61]
Amer, S. M. INVESTIGATION OF THE ABRASION RESISTANCE OF ALUMINUM COPPER MAGNESIUM ALLOY [Volume 19, Issue 4, 2022, Pages 19-27]
Atia, A. M. EROSION OF GLASS FIBRE REINFORCED EPOXY COMPOSITES [Volume 14, Issue 2, 2017, Pages 28-41]
Atia, A. M. EROSION BEHAVIOR OF EPOXY COMPOSITES REINFORCED BY GLASS FIBRE AND FILLED BY SYNTHETIC OIL [Volume 13, Issue 2, 2016, Pages 50-59]
Atia, A. M. ELECTROSTATIC CHARGE GENERATED FROM FABRICS SLIDING ON POLYMERIC MATERIALS [Volume 18, Issue 3, 2021, Pages 59-66]
Atia, A. M. INVESTIGATION OF THE ELECTROSTATIC CHARGE GENERATED FROM FABRICS SLIDING ON PMMA / HDPE COMPOSITES [Volume 19, Issue 2, 2022, Pages 12-23]
Atia, A. M. WEAR OF HIGH DENSITY POLYETHYLENE REINFORCED BY SINGLE WALL CARBON NANOTUBES AND ALUMINIUM OXIDE NANOPARTICLES FOR BEARING MATERIALS APPLICATIONS [Volume 20, Issue 1, 2023, Pages 63-73]
Atia, A. M. TRIBOLOGICAL PROPERTIES OF WOVEN CARBON FIBRE COMPOSITE FOR WIND TURBINE BRAKE PADS [Volume 21, Issue 1, 2024, Pages 109-119]
Atia, A. M. DEVELOPMENT OF DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 2, 2024, Pages 1-14]
Atia, K. M. TRIBOLOGICAL PERFORMANCE OF LITHIUM GREASE DISPERSED BY SILCA NANO PARTICLES AND CARBON NANOTUBES [Volume 18, Issue 3, 2021, Pages 23-34]
Atia, K. M. EFFECT OF DISPERSING LITHIUM GREASE BY CLAY PARTICLES [Volume 18, Issue 4, 2021, Pages 55-65]
Atia, K. M. EFFECT OF ELECTRIC CURRENT ON THE TRIBOLOGICAL PROPERTIES OF LITHIUM GREASE DISPERSED BY SILICA NANO PARTICLES AND CARBON NANOTUBES [Volume 19, Issue 1, 2022, Pages 83-96]
Atia, K. M. TRIBOLOGICAL PROPERTIES OF HIGH DENSITY POLYETHYLENE FILLED BY GRAPHENE OXIDE NANO PARTICLES [Volume 20, Issue 1, 2023, Pages 1-10]
Atia, K. M. MECHANICAL PROPERTIES OF HIGH DENSITY POLYETHYLENE FILLED BY GRAPHENE OXIDE NANO PARTICLES [Volume 20, Issue 1, 2023, Pages 11-21]
Atia, K. M. TRIBOLOGICAL PROPERTIES OF WOVEN CARBON FIBRE COMPOSITE FOR WIND TURBINE BRAKE PADS [Volume 21, Issue 1, 2024, Pages 109-119]
Ayad, M. A. DETERMINING THE OPERATING TIME OF THE ENGINE OILS [Volume 7, Issue 4, 2010, Pages 40-51]
Ayat, S. SELECTION OF WORKING GLOVES BASED ON FRICTION COEFFICIENT [Volume 13, Issue 2, 2016, Pages 1-14]
Ayman, A. A. EFFECT OF HEAT TREATMENT ON THE ABRASION RESISTANCE OF THERMOPLASTIC POLYMERS [Volume 7, Issue 4, 2010, Pages 52-64]

B

Badawi, Mohamed I. ARTIFICIAL PANCREAS WITH CLOSED-LOOP CONTROL FOR TYPE 1 DIABETES: DESIGN, IMPLEMENTATION, AND EVALUATION [Volume 21, Issue 1, 2024, Pages 91-108]
Badran, A. STUDY OF ALUMINUM TUBE COLD NOSING PROCESS INTO CONICAL AND HEMI-SPHERICAL DIES WITH DIFFERENT COEFFICIENTS OF FRICTION [Volume 17, Issue 4, 2020, Pages 55-69]
Badran, A. HARDNESS AND TRIBOLOGICAL PROPERTIES OF PMMA COMPOSITE REINFORCED BY HYBRID GRAPHENE AND TiO2 NANOPARTICLES USED IN DENTAL APPLICATIONS [Volume 19, Issue 2, 2022, Pages 36-47]
Badran, A. H. TRIBOLOGICAL BEHAVIOR OF EPOXY REINFORCED WITH CARBON NANOTUBES AND FILLED BY VEGETABLES OILS [Volume 14, Issue 1, 2017, Pages 51-61]
Badran, A. H. TRIBOLOGICAL PROPERTIES OF EPOXY COMPOSITES [Volume 13, Issue 1, 2016, Pages 53-62]
Badran, A. H. TRIBOLOGICAL PROPERTIES OF POLYESTER COMPOSITES FILLED BY RECYCLED THERMOPLASTIC POLYMERS [Volume 18, Issue 1, 2021, Pages 18-28]
Badran, A. H. TRIBOELECTRIFIED MATERIALS OF FACEMASK TO RESIST COVID-19 [Volume 18, Issue 1, 2021, Pages 52-62]
Badran, A. H. ELECTROSTATIC CHARGES GENERATED ON THE MEDICAL CLOTHES [Volume 18, Issue 2, 2021, Pages 15-26]
Badran, A. H. TRIBOLOGICAL PERFORMANCE OF LITHIUM GREASE DISPERSED BY SILCA NANO PARTICLES AND CARBON NANOTUBES [Volume 18, Issue 3, 2021, Pages 23-34]
Badran, A. H. ELECTROSTATIC CHARGE GENERATED FROM FABRICS SLIDING ON POLYMERIC MATERIALS [Volume 18, Issue 3, 2021, Pages 59-66]
Badran, A. H. SELECTION OF THE PROPER MATERIALS FOR MEDICAL FACEMASK [Volume 18, Issue 4, 2021, Pages 14-24]
Badran, A. H. ENHANCING THE PERFORMANCE OF THE MEDICAL FACEMASK [Volume 18, Issue 4, 2021, Pages 25-36]
Badran, A. H. DEVELOPING THE PERFORMANCE OF THE MEDICAL FACEMASK TO RESIST COVID-19 [Volume 19, Issue 1, 2022, Pages 1-13]
Badran, A. H. EFFECT OF ELECTRIC CURRENT ON THE TRIBOLOGICAL PROPERTIES OF LITHIUM GREASE DISPERSED BY SILICA NANO PARTICLES AND CARBON NANOTUBES [Volume 19, Issue 1, 2022, Pages 83-96]
Badran, A. H. INCREASING THE EFFICIENCY OF THE MEDICAL FACEMASK TO RESIST COVID-19 [Volume 19, Issue 2, 2022, Pages 1-11]
Badran, A. H. INVESTIGATION OF THE ELECTROSTATIC CHARGE GENERATED FROM FABRICS SLIDING ON PMMA / HDPE COMPOSITES [Volume 19, Issue 2, 2022, Pages 12-23]
Badran, A. H. TRIBOLOGICAL PROPERTIES OF HIGH DENSITY POLYETHYLENE FILLED BY GRAPHENE OXIDE NANO PARTICLES [Volume 20, Issue 1, 2023, Pages 1-10]
Badran, A. H. MECHANICAL PROPERTIES OF HIGH DENSITY POLYETHYLENE FILLED BY GRAPHENE OXIDE NANO PARTICLES [Volume 20, Issue 1, 2023, Pages 11-21]
Badran, A. H. ELECTRONIC SKIN BASED ON TRIBOELECTRIFICATION AND ELECTROSTATIC INDUCTION [Volume 20, Issue 2, 2023, Pages 77-86]
Badran, A. H. TRIBOLOGICAL PROPERTIES OF WOVEN CARBON FIBRE COMPOSITE FOR WIND TURBINE BRAKE PADS [Volume 21, Issue 1, 2024, Pages 109-119]
Badran, A. H. FIBER REINFORCED POLYMER MATRIX COMPOSITES FOR ORTHOPAEDIC IMPLANTS [Volume 21, Issue 2, 2024, Pages 39-52]
Bakry, M. ENHANCING THE FRICTIONAL PERFORMANCE OF SPORT GLOVES [Volume 17, Issue 4, 2020, Pages 23-33]
Bakry, M. TRIBOLOGICAL PROPERTIES OF POLYESTER COMPOSITES FILLED BY RECYCLED THERMOPLASTIC POLYMERS [Volume 18, Issue 1, 2021, Pages 18-28]
Bakry, M. TRIBOLOGICAL BEHAVIOUR OF STEEL LUBRICATED BY GREASE FILLED BY POLYMERIC ADDITIVES [Volume 18, Issue 3, 2021, Pages 11-12]
Big-Alabo,, A. PERFORMANCE EVALUATION OF APRICOT KERNEL OIL-BASED CUTTING-FLUID USING L27 ORTHOGONAL ARRAYS DESIGN [Volume 19, Issue 1, 2022, Pages 66-82]
Breemah, A. SAND EROSION TESTING OF POLYMERIC COATINGS OF STEEL SHEETS [Volume 9, Issue 3, 2012, Pages 40-52]

D

Dewidar, M. TRIBOLOGICAL BEHAVIOR OF ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE NANOCOMPOSITES [Volume 18, Issue 2, 2021, Pages 27-41]
Dina, N. FRICTION AND WEAR OF RUBBER FILLED EPOXY COMPOSITES [Volume 14, Issue 3, 2017, Pages 1-17]

E

Eatemad, H. S. FRICTION AND WEAR OF POLYMERIC MATERIALS REINFORCED BY CARBON NANOTUBES [Volume 14, Issue 4, 2017, Pages 1-14]
Eatemad, H. S. FRICTION AND WEAR OF POLYMERIC MATERIALS FILLED BY OIL AND REINFORCED BY NANOCARBON TUBES [Volume 14, Issue 4, 2017, Pages 15-26]
Ebtsam, A. SELECTION OF WORKING GLOVES BASED ON FRICTION COEFFICIENT [Volume 13, Issue 2, 2016, Pages 1-14]
EiD, A. I. TRIBOLOGICAL PROPERTIES OF LOW DENSITY POLYETHYLENE AND POLYAMIDE 12 AS POLYMER MATRIX NANOCOMPOSITES [Volume 14, Issue 4, 2017, Pages 40-53]
El-Abd, A. H. ENHANCING THE SAFETY OF EPOXY FLOOR MATERIALS BY USING COPPER CHIP [Volume 19, Issue 2, 2022, Pages 88-98]
El-Abd, A. H. FRICTIONAL AND ELECTROSTATIC CHARGE PROPERTIES OF TEXTILE MATERIALS [Volume 19, Issue 4, 2022, Pages 11-18]
El-Abden, S. Z. CHARACTERIZATION OF EPOXY RESIN REINFORCED WITH ECO-FRIENDLY VEGETABLE OILS [Volume 20, Issue 3, 2023, Pages 120-136]
El-Abden, S. Z. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON EPOXY FILLED BY NATURAL FIBERS [Volume 21, Issue 1, 2024, Pages 120-133]
El-Abden, S. Z. FRICTION AND WEAR DISPLAYED BY THE SCRATCH OF EPOXY REINFORCED BY NATURAL FIBERS [Volume 21, Issue 2, 2024, Pages 62-70]
El-Abden, S. Z. FRICTION COEFFICIENT DISPLAYED BY SLIDING RUBBER ON EPOXY REINFORCED BY NATURAL FIBERS [Volume 21, Issue 2, 2024, Pages 71-78]
EL-Abden, S. Z. ABRASIVE WEAR RESISTANCE OF PLASTICALY DEFORMED CARBON STEEL [Volume 14, Issue 2, 2017, Pages 42-51]
EL-Abden, S. Z. FRICTION MATERIALS REINFORCED BY PALM FIBRES [Volume 13, Issue 4, 2016, Pages 53-64]
EL-Abden, S. Z. STUDY OF ALUMINUM TUBE COLD NOSING PROCESS INTO CONICAL AND HEMI-SPHERICAL DIES WITH DIFFERENT COEFFICIENTS OF FRICTION [Volume 17, Issue 4, 2020, Pages 55-69]
Eladawi, A. E. TRIBOLOGICAL PERFORMANCE OF POLYMER COMPOSITES REINFORCED BY AGRICULTURAL WASTES [Volume 10, Issue 2, 2013, Pages 36-45]
Elagouz, A. M. DEVELOPMENT OF THE COOLING SYSTEM OF A SINGLE CYLINDER DIESEL ENGINE [Volume 11, Issue 4, 2014, Pages 36-45]
El-batanony, I. G. ON THE STRENGTH AND FAILURE MODE OF CRACKED BOLTED JOINT OF POLYMERIC COMPOSITE [Volume 9, Issue 3, 2012, Pages 13-23]
El-Bouridy, Mohamed E. OPTIMIZING MRI-BASED MEDICAL DIAGNOSIS: COMPARATIVE ANALYSIS OF EFFICIENTNET PERFORMANCE WITH VARYING LEARNING RATES [Volume 21, Issue 2, 2024, Pages 105-119]
El-Giushi, M. A. FRICTION BEHAVIOR OF HYBRID COMPOSITES FILLED BY TITANIUM DIOXIDE NANOPARTICLES [Volume 14, Issue 1, 2017, Pages 40-50]
El-Giushi, M. A. EFFECT OF CURING PROCESS OF DENTAL NANOCOMPOSITE RESIN ON SHORE HARDNESS [Volume 13, Issue 2, 2016, Pages 25-37]
EL-HABAK, A. TOOL WEAR AND SURFACE ROUGHNESS IN TURNING GRP PIPES [Volume 9, Issue 3, 2012, Pages 1-12]
Elhabib, O. A. REDUCING ELECTRIC STATIC CHARGE GENERATED FROM EPOXY FLOORING MATERIALS [Volume 11, Issue 4, 2014, Pages 25-35]
Elhabib, O. A. INSPECTION OF WEAR PARTICLES RETAINED BY THE OIL FILTERS OF AUTOMOTIVE ENGINES [Volume 8, Issue 3, 2011, Pages 15-26]
Elhabib, O. A. DETERMINING THE OPERATING TIME OF THE ENGINE OILS [Volume 7, Issue 4, 2010, Pages 40-51]
Elham, B. R. EFFECT OF FILLING MATERIALS ON THE FRICTION COEFFICIENT OF RECYCLED RUBBER FLOORINGS [Volume 10, Issue 1, 2013, Pages 1-12]
Elham, B. R. EFFECT OF SURFACE ROUGHNESS ON FRICTION COEFFICIENT OF RECYCLED RUBBER FLOORINGS [Volume 10, Issue 1, 2013, Pages 12-25]
Elham, B. R. EFFECT OF FILLING MATERIALS ON THE FRICTION COEFFICIENT OF RECYCLED RUBBER FLOORINGS [Volume 9, Issue 4, 2012, Pages 55-66]
Elham, B. R. FRICTION COEFFICIENT OF SMOOTH AND ROUGH RECYCLED RUBBER FLOORING TILES [Volume 9, Issue 3, 2012, Pages 53-65]
El Hossainy, T. M. LOCALIZED INJECTION OF CUTTING FLUID IN TURNING OPERATION [Volume 9, Issue 1, 2012, Pages 12-23]
EL-HOSSAINY, T. M. TOOL WEAR AND SURFACE ROUGHNESS IN TURNING GRP PIPES [Volume 9, Issue 3, 2012, Pages 1-12]
ElKattan, A. A. FRICTION COEFFICIENT DISPLAYED BY RUBBER SLIDING AGAINST FLOORING TILES [Volume 9, Issue 4, 2012, Pages 28-39]
Elkhouly, Heba I. MECHANICAL AND TRIBOLOGICAL PROPERTIES OF POLYMETHYL METHACRYLATE MATRIX REINFORCED WITH NOVEL HYBRID ORGANIC AND INORGANIC NANO-FILLERS. [Volume 20, Issue 3, 2023, Pages 40-62]
El-Lithy, F. M. INFLUENCE OF MAGNETIC FIELD ON THE FRICTION AND WEAR CAUSED BY THE SCRATCH OF OIL LUBRICATED HIGH DENSITY POLYETHYLENE [Volume 9, Issue 2, 2012, Pages 1-14]
El-Shabasy, A. B. SURFACE IMPROVEMENT OF 7075 ALLOY USING FRICTION STIR PROCESSING [Volume 17, Issue 2, 2020, Pages 1-12]
El-Sharkawy, M. FRICTION AND WEAR OF RUBBER FILLED EPOXY COMPOSITES [Volume 14, Issue 3, 2017, Pages 1-17]
El-Shazly, M. H. EFFECT OF MAGNETIC FIELD ON THE VOLTAGE OUTPUT OF TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 3, 2023, Pages 85-94]
El-Shazly, M. H. INFLUENCE OF MAGNETIC FIELD ON THE PERFORMANCE OF THE TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 1, 2024, Pages 12-23]
El-Shazly, M. H. DEVELOPMENT OF ELECTRONIC SKIN BASED ON BIDIRECTIONAL DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 1, 2024, Pages 134-144]
El-Shazly, M. H. STATISTICAL ANALYSIS ON MECHANICAL PROPERTIES OF FRICTION-STIR-WELDED SUPER DUPLEX STAINLESS STEEL SAF 2507 [Volume 21, Issue 2, 2024, Pages 93-104]
El-Shazly, M. H. THERMO-MECHANICAL MODEL AND VALIDATION FOR FRICTION STIR WELDING OF SUPER DUPLEX STAINLESS STEEL SAF 2507 [Volume 21, Issue 2, 2024, Pages 79-92]
El-Sheikh, M. TRIBOLOGICAL PROPERTIES OF LOW DENSITY POLYETHYLENE AND POLYAMIDE 12 AS POLYMER MATRIX NANOCOMPOSITES [Volume 14, Issue 4, 2017, Pages 40-53]
El‑Sheikh, M. N. INVESTIGATION OF MECHANICAL AND TRIBOLOGICAL PROPERTIES OF THE PTFE/PA12 POLYMERIC DUAL-MATRIX REINFORCED WITH ZnO NPs FOR PROSTHETICS APPLICATIONS. [Volume 20, Issue 3, 2023, Pages 23-39]
El‑Sheikh, M. N. MECHANICAL AND TRIBOLOGICAL PROPERTIES OF POLYMETHYL METHACRYLATE MATRIX REINFORCED WITH NOVEL HYBRID ORGANIC AND INORGANIC NANO-FILLERS. [Volume 20, Issue 3, 2023, Pages 40-62]
El-Sherbiny, M. G. TEMPER COLOURS OF WEAR PARTICLES [Volume 10, Issue 3, 2013, Pages 41-50]
El-Sherbiny, M. G. CHARACTERIZATION OF SOLID PARTICLES CONTAMINATING AUTOMOTIVE OILS BY FERROGRAPHIC EXAMINATION [Volume 9, Issue 1, 2012, Pages 1-11]
El-Sherbiny, M. H. ABRASIVE WEAR OF INTERNAL COMBUSTION ENGINES [Volume 7, Issue 1, 2010, Pages 1-13]
El-Sherbiny, Y. M. PROPER SELECTION OF INDOOR FLOOR BASED ON FRICTION COEFICIENT AND ELECTRIC STATIC CHARGE [Volume 13, Issue 1, 2016, Pages 1-14]
El-Sherbiny, Y. M. TRIBOELECTRIFICATION OF SHOE COVER AND FLOOR IN HOSPITALS [Volume 12, Issue 4, 2015, Pages 1-14]
El-Sherbiny, Y. M. TRIBOELECTRIFICATION OF SHOE SOLES AND FLOOR IN HOSPITALS [Volume 12, Issue 3, 2015, Pages 1-14]
El-Sherbiny, Y. M. FRICTION COEFFICIENT DISPLAYED BY SLIDING AGAINST ARTIFICIAL GRASS [Volume 12, Issue 1, 2015, Pages 13-25]
El-Sherbiny, Y. M. FRICTION COEFFICIENT AND ELECTROSTATIC CHARGE GENERATED FROM RUBBER FOOTWEAR SLIDING AGAINST FLOORING MATERIALS [Volume 11, Issue 4, 2014, Pages 13-24]
El-Sherbiny, Y. M. EFFECT OF SAND ON THE FRICTION COEFFICIENT DISPLAYED BY RUBBER SLIDING AGAINST EPOXY FLOORINGSFILLED BY IRONNANOPARTICLES [Volume 11, Issue 3, 2014, Pages 46-57]
El-Sherbiny, Y. M. FRICTIONAL BEHAVIOUR OF RUBBER FLOORING MAT FITTED BY RECTANGULAR TREADS [Volume 11, Issue 2, 2014, Pages 39-52]
El-Sherbiny, Y. M. ELECTROSTATIC CHARGE GENERATED FROM BARE FOOT AND FOOT WEAR SLIDING AGAINST FLOORING MATERIALS [Volume 11, Issue 1, 2014, Pages 1-11]
El-Sherbiny, Y. M. INCREASING THE SAFETY OF WALKING ON RUBBER FLOOR MAT [Volume 10, Issue 4, 2013, Pages 1-14]
El-Sherbiny, Y. M. FRICTION COEFICIENT OF SEMI-SPHERICAL RUBBER PROTRUSIONS SLIDING AGAINST RUBBER [Volume 10, Issue 3, 2013, Pages 1-12]
El-Sherbiny, Y. M. FRICTION COEFFICIENT OF RECYCLED RUBBER TILES OF DIFFERENT POROSITY [Volume 10, Issue 1, 2013, Pages 38-49]
El-Sherbiny, Y. M. PREVENTION OF SLIP ACCIDENTS BY USING RUBBER FLOOR MAT [Volume 9, Issue 1, 2012, Pages 24-38]
El-Sherbiny, Y. M. FRICTION COEFFICIENT OF RUBBER SLIDING AGAINST FLOORING MATERIALS [Volume 8, Issue 4, 2011, Pages 1-11]
El-Sherbiny, Y. M. REDUCING THE SLIP OF RUBBER MATS ON CERAMIC FLOORINGS [Volume 8, Issue 3, 2011, Pages 1-14]
El-Sherbiny, Y. M. FRICTION COEFFICINET OF RUBBER FLOORING FITTED WITH HOLES AND LEAKAGE GROOVES [Volume 8, Issue 2, 2011, Pages 31-42]
El-Sherbiny, Y. M. FRICTION COEFFICIENT DISPLAYED BY FOOTWEAR WALKING AGAINST RUBBER FLOORING FITTED BY CYLINDRICAL TREADS [Volume 8, Issue 1, 2011, Pages 1-14]
El-Sherbiny, Y. M. FRICTION COEFFICIENT OF RUBBER SLIDING AGAINST DUSTY INDOOR FLOORING [Volume 7, Issue 4, 2010, Pages 11-26]
El-Sherbiny, Y. M. FRICTION COEFFICIENT OF RUBBER SLIDING AGAINST DUSTY INDOOR FLOORING [Volume 7, Issue 2, 2010, Pages 11-25]
El-Sherbiny, Y. M. SELECTION OF FLOOR MATERIALS IN HOSPITALS TO RESIST COVID-19 [Volume 18, Issue 1, 2021, Pages 40-51]
Elsoeudy, R. I. EFFECT OF MULTI-PASS SHIELDED METAL ARC WELDING ON MICROSTRUCTURE CHARACTERIZATION AND MECHANICAL PROPERTIES OF 2507 SUPER DUPLEX STAINLESS STEEL [Volume 20, Issue 3, 2023, Pages 95-108]
Elsoeudy, R. I. STATISTICAL ANALYSIS ON MECHANICAL PROPERTIES OF FRICTION-STIR-WELDED SUPER DUPLEX STAINLESS STEEL SAF 2507 [Volume 21, Issue 2, 2024, Pages 93-104]
Elsoeudy, R. I. THERMO-MECHANICAL MODEL AND VALIDATION FOR FRICTION STIR WELDING OF SUPER DUPLEX STAINLESS STEEL SAF 2507 [Volume 21, Issue 2, 2024, Pages 79-92]
Elwakil, Bassma H. ARTIFICIAL PANCREAS WITH CLOSED-LOOP CONTROL FOR TYPE 1 DIABETES: DESIGN, IMPLEMENTATION, AND EVALUATION [Volume 21, Issue 1, 2024, Pages 91-108]
Elzayady, N. STUDY OF ALUMINUM TUBE COLD NOSING PROCESS INTO CONICAL AND HEMI-SPHERICAL DIES WITH DIFFERENT COEFFICIENTS OF FRICTION [Volume 17, Issue 4, 2020, Pages 55-69]
Elzayady, N. EFFECT OF DISPERSING LITHIUM GREASE BY ALUMINUM OXIDE NANOPARTICLES AND CARBON NANOTUBES [Volume 17, Issue 4, 2020, Pages 34-43]
Elzayady, N. TRIBOELECTRIC NANOGENERATOR BASED ON CONTACT AND SEPARATION AS WELL AS SLIDING OF POLYAMIDE ON POLYTETRAFLUOROETHELENE [Volume 20, Issue 1, 2023, Pages 32-40]
Elzayady, N. PERFORMANCE OF TRIBOELECTRIC NANOGENERATOR ENHANCED BY ELECTROSTATIC INDUCTION [Volume 20, Issue 2, 2023, Pages 13-22]
Elzayady, N. EFFECT OF MULTI-PASS SHIELDED METAL ARC WELDING ON MICROSTRUCTURE CHARACTERIZATION AND MECHANICAL PROPERTIES OF 2507 SUPER DUPLEX STAINLESS STEEL [Volume 20, Issue 3, 2023, Pages 95-108]
Eman, A. INFLUENCE OF ADDING CONTAMINANTS PARTICLES TO LITHIUM GREASE ON FRICTION COEFFICIENT [Volume 14, Issue 1, 2017, Pages 31-39]
Eman, Nassar PHYSICAL AND WEAR RESISTANCE PROPERTIES OF COMPOSITES MADE FROM FIRE CLAY AND RECYCLED POLYSTYRENE [Volume 19, Issue 2, 2022, Pages 48-62]
Eman, Nasser A NEW APPROACH FOR CONTROL SYSTEM OF SOLAR PANELS [Volume 19, Issue 2, 2022, Pages 72-87]
Eman, S. M FRICTION COEFFICIENT AND WEAR DISPLAYED BY THE SCRATCH OF POLYPROPYLENE REINFORCED BY COPPER WIRES [Volume 13, Issue 2, 2016, Pages 38-49]
Eman, S. M FRICTION COEFFICIENT AND WEAR DISPLAYED BY THE SCRATCH OF POLYETHYLENE REINFORCED BY COPPER WIRES [Volume 12, Issue 4, 2015, Pages 15-27]
Eman, S. M FRICTION DISPLAYED BY THE SLIDING OF RUBBER ON EPOXY FILLED BY RECYCLED RUBBER PARTICLES [Volume 18, Issue 3, 2021, Pages 1-10]
Eman, S. M TRIBOLOGICAL PERFORMANCE OF EPOXY FLOOR FILLED BY RECYCLED RUBBER PARTICLES [Volume 19, Issue 4, 2022, Pages 1-10]
Eman, S. M EFFECT OF REINFORCING POLYPROPYLENE BY STEEL WIRES ON FRICTION COEFFICIENT AND WEAR [Volume 20, Issue 1, 2023, Pages 22-31]
Eman, S. M. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON EPOXY FILLED BY RECYCLED RUBBER GRANULATES [Volume 18, Issue 4, 2021, Pages 45-54]
Esayed, A. A. TRIBOLOGICAL PROPERTIES OF HIGH DENSITY POLYETHYLENE FILLED BY GRAPHENE OXIDE NANO PARTICLES [Volume 20, Issue 1, 2023, Pages 1-10]
Esayed, A. A. MECHANICAL PROPERTIES OF HIGH DENSITY POLYETHYLENE FILLED BY GRAPHENE OXIDE NANO PARTICLES [Volume 20, Issue 1, 2023, Pages 11-21]
Eslam, Abd Elaal Mahmoud EFFECT OF MULTI-PASS SHIELDED METAL ARC WELDING ON MICROSTRUCTURE CHARACTERIZATION AND MECHANICAL PROPERTIES OF 2507 SUPER DUPLEX STAINLESS STEEL [Volume 20, Issue 3, 2023, Pages 95-108]
Esraa, A. Elshemy PERFORMANCE OF EPOXY PROTECTIVE COATING BASED ON NANOFILLERS: A REVIEW [Volume 19, Issue 4, 2022, Pages 28-40]
Esraa, S. S. PROPER SELECTION OF FOOT WEARING SOCKS TEXTILES BASED ON FRICTION COEFFICIENT DISPLAYED BY SLIDING AGAINST INDOOR FLOORS [Volume 13, Issue 2, 2016, Pages 15-24]
Ezzat, A. A. THE TRIBOLOGICAL BEHAVIOR OF POLYETHYLENE FILLED BY NANOPOWDER OF ALUMINUM OXIDE [Volume 13, Issue 1, 2016, Pages 15-29]
Ezzat, A. A. WEAR OF POLYVINYL CHLORIDE FILLED BY NANOPARTICLES OF ALUMINUM OXIDE [Volume 13, Issue 1, 2016, Pages 30-42]
Ezzat, A. Showaib PERFORMANCE OF EPOXY PROTECTIVE COATING BASED ON NANOFILLERS: A REVIEW [Volume 19, Issue 4, 2022, Pages 28-40]
Ezzat, F. H. WEAR RESISTANCE OF THERMOPLASTIC COATINGS [Volume 7, Issue 1, 2010, Pages 36-49]

F

Faqihi, Abdullah A. NATURAL OILS AS AN ECO-FRIENDLY LUBRICANT FOR MACHINING OPERATIONS, A REVIEW [Volume 21, Issue 1, 2024, Pages 78-90]
Fekri, M. CHARACTERIZATION OF EPOXY RESIN REINFORCED WITH ECO-FRIENDLY VEGETABLE OILS [Volume 20, Issue 3, 2023, Pages 120-136]
Fouly, A. DEVELOPING FUNCTIONAL COMPOSITE MATERIALS AND TOPOLOGY OPTIMIZATION FOR STRUCTURAL APPLICATION OF CLIMBING ROBOTS [Volume 16, Issue 3, 2019, Pages 63-70]
Fouly, A. ELECTROSTATIC CHARGES GENERATED ON THE MEDICAL CLOTHES [Volume 18, Issue 2, 2021, Pages 15-26]

G

Gaafer, A. M. MECHANICAL AND TRIBOLOGICAL PROPERTIES OF COATED STEEL BLANKING PUNCH [Volume 17, Issue 1, 2020, Pages 27-35]
Gaafer, A. M. MECHANICAL PROPERTIES OF FRICTION STIR AND GAS TUNGSTEN ARC WELDED AA6061 ALUMINUM ALLOY JOINTS [Volume 17, Issue 1, 2020, Pages 36-45]
Gad-Allah, Nabil A. LUBRICANT FILM BEHAVIOR IN SPUR GEARS [Volume 18, Issue 4, 2021, Pages 1-13]
Gassour, H. ECO-GREEN SILVER NANOPARTICLES PREPARATION, CHARACTERIZATION, AND TRIBOLOGICAL ENHANCEMENTS ON 6061AMC [Volume 21, Issue 1, 2024, Pages 62-77]
Ghanem, M. A. ON THE STRENGTH AND FAILURE MODE OF CRACKED BOLTED JOINT OF POLYMERIC COMPOSITE [Volume 9, Issue 3, 2012, Pages 13-23]
Gharra, F. A. EFFECTS OF DESIGN AND OPERATING PARAMETERS ON HANDLING BEHAVIOR OF A THREE-WHEEL VEHICLE [Volume 18, Issue 2, 2021, Pages 50-62]

H

Hamdy, K. HARDNESS AND TRIBOLOGICAL PROPERTIES OF PMMA COMPOSITE REINFORCED BY HYBRID GRAPHENE AND TiO2 NANOPARTICLES USED IN DENTAL APPLICATIONS [Volume 19, Issue 2, 2022, Pages 36-47]
Hamdy, K. INVESTIGATION OF THE ABRASION RESISTANCE OF ALUMINUM COPPER MAGNESIUM ALLOY [Volume 19, Issue 4, 2022, Pages 19-27]
Hamdy, K. WEAR OF HIGH DENSITY POLYETHYLENE REINFORCED BY SINGLE WALL CARBON NANOTUBES AND ALUMINIUM OXIDE NANOPARTICLES FOR BEARING MATERIALS APPLICATIONS [Volume 20, Issue 1, 2023, Pages 63-73]
Hamdy, K. REDUCING ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON PROPOSED ARTIFICIAL TURF [Volume 21, Issue 1, 2024, Pages 1-11]
Hamed, A. M. EFFECT OF HEAT TREATMENT ON THE ABRASION RESISTANCE OF THERMOPLASTIC POLYMERS [Volume 7, Issue 4, 2010, Pages 52-64]
Hanan, A. SELECTION OF WORKING GLOVES BASED ON FRICTION COEFFICIENT [Volume 13, Issue 2, 2016, Pages 1-14]
Hasan, M. K. TRIBOLOGICAL BEHAVIOR OF EPOXY REINFORCED WITH CARBON NANOTUBES AND FILLED BY VEGETABLES OILS [Volume 14, Issue 1, 2017, Pages 51-61]
Hasan, M. K. TRIBOLOGICAL PROPERTIES OF EPOXY COMPOSITES [Volume 13, Issue 1, 2016, Pages 53-62]
Hasouna, A. T. INFLUENCE OF TREAD GROOVE WIDTH OF RUBBER ON FRICTION COEFFICIENT [Volume 11, Issue 4, 2014, Pages 46-57]
Hasouna, A. T. FRICTION COEFFICIENT OF RUBBER SLIDING AGAINST FLOORING MATERIALS [Volume 8, Issue 4, 2011, Pages 1-11]
Hasouna, A. T. REDUCING THE SLIP OF RUBBER MATS ON CERAMIC FLOORINGS [Volume 8, Issue 3, 2011, Pages 1-14]
Hasouna, A. T. FRICTION BETWEEN FOOT, SOCKS AND INSOLES [Volume 7, Issue 4, 2010, Pages 27-39]
Hasouna, A. T. FRICTION BETWEEN FOOT, SOCKS AND INSOLES [Volume 7, Issue 2, 2010, Pages 26-38]
Hasouna, A. T. EXPERIMENTAL STUDY OF ABRASIVE WEAR RESISTANT POLYESTER COMPOSITES [Volume 7, Issue 1, 2010, Pages 26-35]
Hassan, A. El-Sayed M. TRIBOLOGICAL PROPERTIES OF LOW DENSITY POLYETHYLENE AND POLYAMIDE 12 AS POLYMER MATRIX NANOCOMPOSITES [Volume 14, Issue 4, 2017, Pages 40-53]
Hassan, A. El-Sayed M. INVESTIGATION OF MECHANICAL AND TRIBOLOGICAL PROPERTIES OF THE PTFE/PA12 POLYMERIC DUAL-MATRIX REINFORCED WITH ZnO NPs FOR PROSTHETICS APPLICATIONS. [Volume 20, Issue 3, 2023, Pages 23-39]
Hassan, A. El-Sayed M. MECHANICAL AND TRIBOLOGICAL PROPERTIES OF POLYMETHYL METHACRYLATE MATRIX REINFORCED WITH NOVEL HYBRID ORGANIC AND INORGANIC NANO-FILLERS. [Volume 20, Issue 3, 2023, Pages 40-62]
Hassan, H. A. FRACTURE TOUGHNESS ANALYSIS OF AXIAL PARTIALLY THROUGH CRACKS IN X65 AND X70 STEEL PIPES [Volume 17, Issue 1, 2020, Pages 46-52]
Hassan, H. A. SURFACE IMPROVEMENT OF 7075 ALLOY USING FRICTION STIR PROCESSING [Volume 17, Issue 2, 2020, Pages 1-12]
Hassan, M. L. TRIBOLOGICAL BEHAVIOR OF ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE NANOCOMPOSITES [Volume 18, Issue 2, 2021, Pages 27-41]
Hassouna, A. T. INCREASING THE SAFETY OF WALKING ON RUBBER FLOOR MAT [Volume 10, Issue 4, 2013, Pages 1-14]
Hassouna, A. T. INVESTIGATION OF FRICTION COEFFICIENT OF THE SURFCAE OF ROBOTIC GRIPPER [Volume 18, Issue 1, 2021, Pages 29-39]
Hassouna, A. T. INFLUENCE OF ELECTROSTATIC CHARGE ON FRICTION OF GRIPPER IN HANDLING MATERIAL [Volume 18, Issue 2, 2021, Pages 63-74]
Hassouna, A. T. CONTROL OF FRICTION TO ADAPT GRIP FORCE BY ELECTROSTATIC CHARGE [Volume 18, Issue 3, 2021, Pages 52-58]
Helal, M. DESIGN OPTIMIZATION FOR CRUTCHES PADS FOR THE DISABLED TO PREVENT THE SLIPPAGE ON ALTERED FLOORS [Volume 18, Issue 2, 2021, Pages 42-49]
Hewidy, A. M. MECHANICAL AND TRIBOLOGICAL CHARACTERISTICS OF STIR-CASTING Al2O3-SiC-Gr/Al6063 HYBRID COMPOSITE [Volume 21, Issue 1, 2024, Pages 24-38]

I

Ibraheem, A. A. TRIBOLOGICAL BEHAVOUR OF HEAT TREATED HOT WORK STEELS [Volume 11, Issue 1, 2014, Pages 35-45]
Ibraheem, A. A. TRIBOLOGICAL BEHAVOUR OF HEAT TREATED COLD WORK STEELS [Volume 10, Issue 3, 2013, Pages 51-62]
Ibraheem, A. A. INFLUENCE OF HEAT TREATMENT ON FRICTION AND WEAR OF DUCTILE IRON: ROLE OF CHROMIUM AND NICKEL [Volume 9, Issue 4, 2012, Pages 40-54]
Ibraheem, A. A. INFLUENCE OF HEAT TREATMENT ON FRICTION AND WEAR OF UNALLOYED DUCTILE IRON [Volume 9, Issue 1, 2012, Pages 52-64]
Ibrahem, R. A. ENHANCING THE TRIBOLOGICAL PROPERTIES OF BEARINGS IN MANIPULATORS [Volume 17, Issue 1, 2020, Pages 62-72]
Ibrahem, R. A. EFFECT OF DATE PALM SEEDS ON THE TRIBOLOGICAL BEHAVIOUR OF POLYESTER COMPOSITES [Volume 12, Issue 3, 2015, Pages 55-63]
Ibrahem, R. A. EFFECT OF BLENDING POLYETHYLENE TURF BY POLYMETHYL METHACRYLATE AND POLYAMIDE ON GENERATION OF ELECTROSTATIC CHARGE [Volume 17, Issue 2, 2020, Pages 50-60]
Ibrahem, R. A. INFLUENCE OF BLENDING POLYETHYLENE TURF BY COPPER TEXTILE ON GENERATION OF ELECTROSTATIC CHARGE [Volume 17, Issue 3, 2020, Pages 14-25]
Ibrahem, R. A. EFFECT OF BLENDING POLYETHYLENE TURF BY CONDUCTING MATERIALS ON ELECTROSTATIC CHARGE GENERATED FROM FRICTION [Volume 17, Issue 3, 2020, Pages 59-71]
Ibrahem, R. A. EFFECT OF CONDUCTING MATERIALS ON ELECTROSTATIC CHARGE GENERATED FROM SLIDING ON POLYETHYLENE TURF [Volume 17, Issue 3, 2020, Pages 48-58]
Ibrahem, R. A. SLIDING OF POLYETHYLENE COMPOSITES ON ARTIFICIAL TURF [Volume 17, Issue 4, 2020, Pages 12-22]
Ibrahem, R. A. ENHANCING THE FRICTIONAL PERFORMANCE OF SPORT GLOVES [Volume 17, Issue 4, 2020, Pages 23-33]
Ibrahem, R. A. EFFECT OF VEGETABLE OILS AS LUBRICATING/COOLING MEDIUM DURING MACHINING PROCESSES ON SURFACE ROUGHNESS [Volume 18, Issue 1, 2021, Pages 1-7]
Ibrahem, R. A. SELECTION OF FLOOR MATERIALS IN HOSPITALS TO RESIST COVID-19 [Volume 18, Issue 1, 2021, Pages 40-51]
Ibrahem, R. A. PROPER MATERIAL SELECTION OF MEDICAL SAFETY GOGGLES [Volume 18, Issue 2, 2021, Pages 1-14]
Ibrahem, R. A. PERFORMANCE EVALUATION OF FREE-STANDING TRIBOELECTRIC GENERATOR (F-S TEG) USING DIFFERENT ELECTRODES AND TRIBOELECTRIC LAYERS [Volume 21, Issue 1, 2024, Pages 53-61]
Ibrahem, R. A. NATURAL OILS AS AN ECO-FRIENDLY LUBRICANT FOR MACHINING OPERATIONS, A REVIEW [Volume 21, Issue 1, 2024, Pages 78-90]
Ibrahim, A. DEVELOPING FUNCTIONAL COMPOSITE MATERIALS AND TOPOLOGY OPTIMIZATION FOR STRUCTURAL APPLICATION OF CLIMBING ROBOTS [Volume 16, Issue 3, 2019, Pages 63-70]
Ibrahim, A. A. INFLUENCE OF REINFORCING POLYMETHYL METHACRYLATE BY CARBON FIBRES ON FRICTION AND WEAR [Volume 14, Issue 2, 2017, Pages 52-60]
Ibrahim, A. A. FRICTION AND WEAR OF CARBON FIBRES REINFORCED EPOXY COMPOSITES [Volume 13, Issue 4, 2016, Pages 12-27]
Ibrahim, A. M. ECO-GREEN SILVER NANOPARTICLES PREPARATION, CHARACTERIZATION, AND TRIBOLOGICAL ENHANCEMENTS ON 6061AMC [Volume 21, Issue 1, 2024, Pages 62-77]
Ibrahim, A. M. M. DESIGN OPTIMIZATION FOR CRUTCHES PADS FOR THE DISABLED TO PREVENT THE SLIPPAGE ON ALTERED FLOORS [Volume 18, Issue 2, 2021, Pages 42-49]
Ibrahim, A. S. COMPARATIVE PERFORMANCE OF FRICTION COEFFICIENT DISPLAYED BY POLYMERS FILLED BY VEGETABLES OILS [Volume 12, Issue 4, 2015, Pages 53-66]
Ibrahim, A. S. FRICTION COEFFICIENT DISPLAYED BY POLYAMIDE FILLED BY VEGETABLES OILS [Volume 11, Issue 3, 2014, Pages 34-45]
Ibrahim, M. Hassab-Allah FRICTION AND WEAR OF POLYMERIC COMPOSITES FILLED BY OILS [Volume 17, Issue 4, 2020, Pages 44-54]
Ibrahim, R. A. INFLUENCE OF NATURAL FILLERS ON TRIBOLOGICAL AND MECHANICAL PERFORMANCE OF POLYESTER COMPOSITES [Volume 13, Issue 1, 2016, Pages 43-53]
Ibrahim, R. A. EFFECT OF HEAT TREATMENT ON THE TRIBOLOGICAL PROPERTIES OF POLYURETHANE COATINGS [Volume 12, Issue 2, 2015, Pages 30-43]
Ibrahim, R. A. EFFECT OF SAND ON THE FRICTION COEFFICIENT DISPLAYED BY RUBBER SLIDING AGAINST EPOXY FLOORINGSFILLED BY IRONNANOPARTICLES [Volume 11, Issue 3, 2014, Pages 46-57]
Ibrahim, R. A. TRIBOLOGICAL AND MECHANICAL PROPERTIES OF POLYMERIC COMPOSITES REINFORCED BY METALLIC FILLERS [Volume 11, Issue 2, 2014, Pages 53-62]
Ibrahim, R. A. TRIBOLOGICAL AND MECHANICAL PERFORMANCE OF POLYESTER COMPOSITES FILLED BY JASMINE DRY LEAVES [Volume 10, Issue 4, 2013, Pages 58-65]
Ibrahim, R. A. EFFECT OF CORN HUSK ON THE MECHANICAL AND FRICTIONAL BEHAVIOR OF POLYESTER COMPOSITES [Volume 10, Issue 2, 2013, Pages 28-35]
Ibrahim, R. A. TRIBOLOGICAL PERFORMANCE OF POLYMER COMPOSITES REINFORCED BY AGRICULTURAL WASTES [Volume 10, Issue 2, 2013, Pages 36-45]

K

Kassar, M. H. WEAR RESISTANCE OF STEEL COATED BY POLYURETHANE REINFORCED BY STEEL WIRES [Volume 13, Issue 3, 2016, Pages 46-56]
Kassar, M. H. WEAR AND MECHANICAL PERFORMANCE OF HDPE AL2O3 NPS AND CNTS MATRIX AS FRICTIONAL MATERIALS APPLICATIONS [Volume 20, Issue 3, 2023, Pages 109-119]
Khalifa, A. TRIBOLOGICAL BEHAVIOR ASSESSMENT OF 3D PRINTED PLA+ SAMPLES IMPREGNATED WITH LIQUID ANAEROBIC METHACRYLATE LUBRICANT [Volume 18, Issue 4, 2021, Pages 37-44]
Khansaa, A. M. PROPER SELECTION OF FOOT WEARING SOCKS TEXTILES BASED ON FRICTION COEFFICIENT DISPLAYED BY SLIDING AGAINST INDOOR FLOORS [Volume 13, Issue 2, 2016, Pages 15-24]
Khashaba, M. I. INFLUENCE OF FILLING MEDIUM DENSITY POLYETHYLENE BY ALMOND OIL AND TALC ON FRICTION AND WEAR [Volume 16, Issue 3, 2019, Pages 1-14]
Khashaba, M. I. INCREASING FRICTION COEFFICIENT DISPLAYED BY SLIDING BETWEEN THE FOOTBALL AND THE GLOVES OF THE GOALKEEPER [Volume 16, Issue 3, 2019, Pages 15-25]
Khashaba, M. I. FRICTION AND WEAR OF POLYMERIC MATERIALS REINFORCED BY CARBON NANOTUBES [Volume 14, Issue 4, 2017, Pages 1-14]
Khashaba, M. I. FRICTION AND WEAR OF POLYMERIC MATERIALS FILLED BY OIL AND REINFORCED BY NANOCARBON TUBES [Volume 14, Issue 4, 2017, Pages 15-26]
Khashaba, M. I. REDUCING ELECTROSTATIC CHARGE GENERATED ON POLYMERIC FLOOR IN HOSPITALS [Volume 14, Issue 3, 2017, Pages 18-33]
Khashaba, M. I. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF POLYETHYLENE AGAINST POLYTETRAFLUOROETHYLENE [Volume 14, Issue 3, 2017, Pages 34-49]
Khashaba, M. I. DEPENDENCY OF FRICTION ON ELECTROSTATIC CHARGE GENERATED ON POLYMERIC SURFACES [Volume 14, Issue 3, 2017, Pages 50-65]
Khashaba, M. I. ELECTROSTATIC CHARGE GENERATED ON FLOOR MATERIAL GROUNDED BY STAINLESS STEEL STRIPS [Volume 14, Issue 2, 2017, Pages 16-27]
Khashaba, M. I. ELECTROSTATIC CHARGE GENERATED ON FLOOR IN HOSPITALS [Volume 14, Issue 1, 2017, Pages 1-14]
Khashaba, M. I. REDUCING ELECTROSTATIC CHARGE GENERATED FROM SLIDING AGAINST POLYMERIC FLOOR IN HOSPITALS [Volume 14, Issue 1, 2017, Pages 15-30]
Khashaba, M. I. EFFECT OF COPPER WIRES REINFORCING POLYETHYLENE ON GENERATING ELECTROSTATIC CHARGE [Volume 13, Issue 4, 2016, Pages 28-40]
Khashaba, M. I. ELECTROSTATIC CHARGE GENERATED FROM THE SLIDING OF THE FOOTBALL ON THE GLOVES OF THE GOALKEEPER [Volume 13, Issue 4, 2016, Pages 41-52]
Khashaba, M. I. FRICTION COEFFICIENT DISPLAYED BY SLIDING THE FOOTBALL ON THE GLOVES OF THE GOALKEEPER [Volume 13, Issue 3, 2016, Pages 21-33]
Khashaba, M. I. TRIBOELECTRIFICATION OF LATEX AND POLYETHYLENE GLOVES [Volume 13, Issue 3, 2016, Pages 34-45]
Khashaba, M. I. FRICTION COEFFICIENT AND WEAR DISPLAYED BY THE SCRATCH OF POLYPROPYLENE REINFORCED BY COPPER WIRES [Volume 13, Issue 2, 2016, Pages 38-49]
Khashaba, M. I. FRICTION COEFFICIENT AND WEAR DISPLAYED BY THE SCRATCH OF POLYETHYLENE REINFORCED BY COPPER WIRES [Volume 12, Issue 4, 2015, Pages 15-27]
Khashaba, M. I. FRICTION COEFFICIENT DISPLAYED BY SLIDING OF RUBBER SOLE AGAINST RECYCLED RUBBER FLOORING TILES [Volume 12, Issue 4, 2015, Pages 28-39]
Khashaba, M. I. COMPARATIVE PERFORMANCE OF FRICTION COEFFICIENT DISPLAYED BY POLYMERS FILLED BY VEGETABLES OILS [Volume 12, Issue 4, 2015, Pages 53-66]
Khashaba, M. I. EFFECT OF LUBRICATING ADDITIVES ON THE PERFORMANCE OF ROLLING BEARINGS [Volume 12, Issue 3, 2015, Pages 15-27]
Khashaba, M. I. INFLUENCE OF INDUCTION MAGNETIC FIELD ON FRICTION COEFFICIENT OF STEEL SLIDING AGAINST OIL LUBRICATED POLYMERS [Volume 12, Issue 1, 2015, Pages 37-48]
Khashaba, M. I. FRICTION COEFFICIENT OF GROOVED RUBBER DISC SLIDING AGAINST CERAMICS: III. EFFECT OF THE GROOVES [Volume 11, Issue 3, 2014, Pages 1-18]
Khashaba, M. I. FRICTION COEFFICIENT DISPLAYED BY POLYAMIDE FILLED BY VEGETABLES OILS [Volume 11, Issue 3, 2014, Pages 34-45]
Khashaba, M. I. FRICTION COEFFICIENT OF GROOVED RUBBER DISC SLIDING AGAINST CERAMICS: I. EFFECT OF MOTION DIRECTION [Volume 11, Issue 2, 2014, Pages 1-20]
Khashaba, M. I. FRICTION COEFFICIENT OF GROOVED RUBBER DISC SLIDING AGAINST CERAMICS: II. EFFECT OF LOAD [Volume 11, Issue 2, 2014, Pages 21-38]
Khashaba, M. I. TRIBOLOGICAL BEHAVOUR OF HEAT TREATED HOT WORK STEELS [Volume 11, Issue 1, 2014, Pages 35-45]
Khashaba, M. I. DRY SLIDING OF TREADED RUBBER ON CERAMICS [Volume 10, Issue 4, 2013, Pages 15-28]
Khashaba, M. I. DRY AND WATER WETTED SLIDING OF RUBBER ON EPOXY FLOORING FILLED BY THERMOPLASTIC POLYMERS [Volume 10, Issue 4, 2013, Pages 29-39]
Khashaba, M. I. FRICTION AND TRIBOELECTRIFICATION OF EPOXY FLOORINGS FILLED BY ALUMINIUM OXIDE NANOPARTICLES [Volume 10, Issue 4, 2013, Pages 40-57]
Khashaba, M. I. TRIBOLOGICAL BEHAVOUR OF HEAT TREATED COLD WORK STEELS [Volume 10, Issue 3, 2013, Pages 51-62]
Khashaba, M. I. EFFECT OF FILLING MATERIALS ON THE FRICTION COEFFICIENT OF RECYCLED RUBBER FLOORINGS [Volume 10, Issue 1, 2013, Pages 1-12]
Khashaba, M. I. EFFECT OF SURFACE ROUGHNESS ON FRICTION COEFFICIENT OF RECYCLED RUBBER FLOORINGS [Volume 10, Issue 1, 2013, Pages 12-25]
Khashaba, M. I. INFLUENCE OF HEAT TREATMENT ON FRICTION AND WEAR OF DUCTILE IRON: ROLE OF CHROMIUM AND NICKEL [Volume 9, Issue 4, 2012, Pages 40-54]
Khashaba, M. I. EFFECT OF FILLING MATERIALS ON THE FRICTION COEFFICIENT OF RECYCLED RUBBER FLOORINGS [Volume 9, Issue 4, 2012, Pages 55-66]
Khashaba, M. I. FRICTION COEFFICIENT OF SMOOTH AND ROUGH RECYCLED RUBBER FLOORING TILES [Volume 9, Issue 3, 2012, Pages 53-65]
Khashaba, M. I. DRY SLIDING OF POLYESTER COMPOSITES FILLED BY NANOPARTICLES AGAINST STEEL [Volume 9, Issue 2, 2012, Pages 43-59]
Khashaba, M. I. OIL LUBRICATED SLIDING OF POLYESTER COMPOSITES FILLED BY NANOPARTICLES AGAINST STEEL [Volume 9, Issue 2, 2012, Pages 60-76]
Khashaba, M. I. INFLUENCE OF HEAT TREATMENT ON FRICTION AND WEAR OF UNALLOYED DUCTILE IRON [Volume 9, Issue 1, 2012, Pages 52-64]
Khashaba, M. I. EFFECT OF MAGNETIC FIELD ON FRICTION AND WEAR OF STEEL [Volume 8, Issue 2, 2011, Pages 1-15]
Khashaba, M. I. EFFECT OF MAGNETIC FIELD ON FRICTION AND WEAR OF BRASS [Volume 8, Issue 2, 2011, Pages 16-30]
Khashaba, M. I. FRICTION COEFFICINET OF RUBBER FLOORING FITTED WITH HOLES AND LEAKAGE GROOVES [Volume 8, Issue 2, 2011, Pages 31-42]
Khashaba, M. I. FRICTION AND WEAR OF AUTOMOTIVE FRICTION MATERIALS [Volume 8, Issue 1, 2011, Pages 40-52]
Khashaba, M. I. FADE AND TEMPERATURE RISE OF AUTOMOTIVE FRICTION MATERIALS [Volume 8, Issue 1, 2011, Pages 53-64]
Khashaba, M. I. EFFECT OF POLYMERIC POWDER ON THE FRICTION AND WEAR OF SAND CONTAMINATED GREASED SURFACES [Volume 7, Issue 1, 2010, Pages 50-60]
Khashaba, M. I. FRICTION DISPLAYED BY THE SLIDING OF RUBBER ON EPOXY FILLED BY RECYCLED RUBBER PARTICLES [Volume 18, Issue 3, 2021, Pages 1-10]
Khashaba, M. I. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON EPOXY FILLED BY RECYCLED RUBBER GRANULATES [Volume 18, Issue 4, 2021, Pages 45-54]
Khashaba, M. I. TRIBOLOGICAL PERFORMANCE OF EPOXY FLOOR FILLED BY RECYCLED RUBBER PARTICLES [Volume 19, Issue 4, 2022, Pages 1-10]
Khashaba, M. I. EFFECT OF REINFORCING POLYPROPYLENE BY STEEL WIRES ON FRICTION COEFFICIENT AND WEAR [Volume 20, Issue 1, 2023, Pages 22-31]
Khashaba, M. Y. WEAR RESISTANCE OF STEEL COATED BY POLYURETHANE REINFORCED BY STEEL WIRES [Volume 13, Issue 3, 2016, Pages 46-56]
Khattab, A. A. ABRASION RESISTANCE OF RECYCLED POLYMERIC COATING [Volume 7, Issue 1, 2010, Pages 14-25]
Khattab, A. A. WEAR RESISTANCE OF THERMOPLASTIC COATINGS [Volume 7, Issue 1, 2010, Pages 36-49]

L

Lashin, M. M. A. MECHANICAL AND TRIBOLOGICAL PROPERTIES OF COATED STEEL BLANKING PUNCH [Volume 17, Issue 1, 2020, Pages 27-35]

M

M., Elsamanty DYNAMIC CHARACTERISTICS STUDY OF RE-ENTRANT HONEYCOMB AUXETIC STRUCTURE FOR AL6082 [Volume 17, Issue 3, 2020, Pages 37-47]
M. A., Eyad WEAR BEHAVIOR OF CERVICAL FUSION PLATES FABRICATED FROM POLYETHYLENE REINFORCED BY KEVLAR AND CARBON FIBERS [Volume 18, Issue 1, 2021, Pages 8-17]
M. A., Eyad FRICTION DISPLAYED BY THE SLIDING OF RUBBER ON EPOXY FILLED BY RECYCLED RUBBER PARTICLES [Volume 18, Issue 3, 2021, Pages 1-10]
M. A., Eyad ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON EPOXY FILLED BY RECYCLED RUBBER GRANULATES [Volume 18, Issue 4, 2021, Pages 45-54]
M. A., Eyad TRIBOLOGICAL PERFORMANCE OF EPOXY FLOOR FILLED BY RECYCLED RUBBER PARTICLES [Volume 19, Issue 4, 2022, Pages 1-10]
M. A., Eyad FIBER REINFORCED POLYMER MATRIX COMPOSITES FOR ORTHOPAEDIC IMPLANTS [Volume 21, Issue 2, 2024, Pages 39-52]
Magda, S. DRY SLIDING OF POLYESTER COMPOSITES FILLED BY NANOPARTICLES AGAINST STEEL [Volume 9, Issue 2, 2012, Pages 43-59]
Magda, S. OIL LUBRICATED SLIDING OF POLYESTER COMPOSITES FILLED BY NANOPARTICLES AGAINST STEEL [Volume 9, Issue 2, 2012, Pages 60-76]
Maha, M. A. Lashin OPTIMIZATION OF WEAR RESISTANCE AND AMORPHOUS CONTENT FOR FECRMOCB-MG COMPOSITE BY USING FUZZY LOGIC CONTROL SYSTEM [Volume 18, Issue 4, 2021, Pages 66-78]
Mahmoud, Abdelrahim ROBUST TRACKING CONTROL FOR SLOSH-CONTAINER SYSTEM AGAINST VISCOUS FRICTION UNCERTAINTY [Volume 19, Issue 1, 2022, Pages 55-65]
Mahmoud, K. H. INFLUENCE OF FILLING MEDIUM DENSITY POLYETHYLENE BY ALMOND OIL AND TALC ON FRICTION AND WEAR [Volume 16, Issue 3, 2019, Pages 1-14]
Mahmoud, M. EFFECT OF TIP RADIUS OF THE INDENTERS ON FRICTION COEFFICIENT OF THE SCRATCHED METALLIC SHEETS [Volume 10, Issue 1, 2013, Pages 26-37]
Mahmoud, M. TRIBOLOGICAL BEHAVIOR ASSESSMENT OF 3D PRINTED PLA+ SAMPLES IMPREGNATED WITH LIQUID ANAEROBIC METHACRYLATE LUBRICANT [Volume 18, Issue 4, 2021, Pages 37-44]
Mahmoud, M. M. FRICTION COEFFICIENT OF RECYCLED RUBBER SOLES [Volume 13, Issue 4, 2016, Pages 1-12]
Mahmoud, M. M. EFFECT OF ELECTRIC STATIC CHARGE ON FRICTION COEFFICIENT DISPLAYED BY SLIDING OF RUBBER SOLE AGAINST EPOXY FLOOR REINFORCED BY COPPER WIRES [Volume 12, Issue 4, 2015, Pages 40-52]
Mahmoud, M. M. ELECTRIC STATIC CHARGE GENERATED FROM SLIDING OF EPOXY COMPOSITES REINFORCED BY COPPER WIRES AGAINST RUBBER [Volume 12, Issue 3, 2015, Pages 28-39]
Mahmoud, M. M. INCREASING THE SAFETY OF WALKING AGAINST EPOXY FLOORINGS REINFORCED BY METALLIC WIRES [Volume 12, Issue 3, 2015, Pages 40-54]
Mahmoud, M. M. SAND EROSION BEHAVIOUR OF TRANSPARENT PVC THIN FILM COATINGS [Volume 12, Issue 2, 2015, Pages 44-45]
Mahmoud, M. M. ELECTROSTATIC CHARACTERISTICS OF COPPER WIRES REINFORCED EPOXY MATRIX COMPOSITES [Volume 12, Issue 2, 2015, Pages 55-68]
Mahmoud, M. M. FRICTION COEFFICIENT DISPLAYED BY RUBBER CYLINDRICAL PROTRUSIONS FITTED BY HOLES SLIDING AGAINST CERAMIC FLOORING [Volume 12, Issue 1, 2015, Pages 1-12]
Mahmoud, M. M. DETERMINING THE OPERATING TIME OF THE ENGINE OILS [Volume 7, Issue 4, 2010, Pages 40-51]
Mahmoud, M. M. TRIBOLOGICAL PROPERTIES OF POLYMERIC MATERIALS LUBRICATED BY SAND CONTAMINATED WATER [Volume 17, Issue 3, 2020, Pages 26-36]
Mahmoud, M. M. THE EFFECT OF WELDING FRICTION PARAMETERS ON THE MECHANICAL PROPERTIES OF THE MAINTAINED ANODIC YOK IN THE ALUMINUM INDUSTRY [Volume 20, Issue 3, 2023, Pages 63-74]
Mahmoud, M. M. EFFECT OF HEAT TREATMENT ON THE TRIBOLOGICAL PROPERTIES OF TOOL STEEL AND MOLD STEEL [Volume 21, Issue 1, 2024, Pages 39-52]
Mahmoud, Z. Ibrahim OPTIMIZATION OF WEAR RESISTANCE AND AMORPHOUS CONTENT FOR FECRMOCB-MG COMPOSITE BY USING FUZZY LOGIC CONTROL SYSTEM [Volume 18, Issue 4, 2021, Pages 66-78]
Mai, K. M. FRICTION COEFFICIENT DISPLAYED BY SLIDING OF RUBBER SOLE AGAINST RECYCLED RUBBER FLOORING TILES [Volume 12, Issue 4, 2015, Pages 28-39]
Makady, A. M. FRACTURE TOUGHNESS ANALYSIS OF AXIAL PARTIALLY THROUGH CRACKS IN X65 AND X70 STEEL PIPES [Volume 17, Issue 1, 2020, Pages 46-52]
Mansour, H. ABRASIVE WEAR OF POLYESTER COMPOSITES [Volume 11, Issue 2, 2014, Pages 63-72]
Marzouk, M. E. ABRASIVE WEAR RESISTANCE OF POLYMERS REINFORCED BY SILICON CARBIDE NANOFIBERS [Volume 16, Issue 3, 2019, Pages 36-47]
Marzouk, M. E. EFFECT OF LUBRICATING ADDITIVES ON THE PERFORMANCE OF ROLLING BEARINGS [Volume 12, Issue 3, 2015, Pages 15-27]
Marzouk, W. W. TRIBOLOGICAL BEHAVIOR ASSESSMENT OF 3D PRINTED PLA+ SAMPLES IMPREGNATED WITH LIQUID ANAEROBIC METHACRYLATE LUBRICANT [Volume 18, Issue 4, 2021, Pages 37-44]
Massoud, M. A. ELECTRONIC SKIN BASED ON TRIBOELECTRIFICATION AND ELECTROSTATIC INDUCTION [Volume 20, Issue 2, 2023, Pages 77-86]
Massoud, M. A. EFFECT OF MAGNETIC FIELD ON THE VOLTAGE OUTPUT OF TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 3, 2023, Pages 85-94]
Massoud, M. A. DEVELOPMENT OF ELECTRONIC SKIN BASED ON BIDIRECTIONAL DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 1, 2024, Pages 134-144]
Massoud, Mohamed Ahmed OPTIMIZING MRI-BASED MEDICAL DIAGNOSIS: COMPARATIVE ANALYSIS OF EFFICIENTNET PERFORMANCE WITH VARYING LEARNING RATES [Volume 21, Issue 2, 2024, Pages 105-119]
Massoud, Mohamed Ahmed ARTIFICIAL PANCREAS WITH CLOSED-LOOP CONTROL FOR TYPE 1 DIABETES: DESIGN, IMPLEMENTATION, AND EVALUATION [Volume 21, Issue 1, 2024, Pages 91-108]
Mayada, S. A. FRICTION AND TRIBOELECTRIFICATION OF EPOXY FLOORINGS FILLED BY ALUMINIUM OXIDE NANOPARTICLES [Volume 10, Issue 4, 2013, Pages 40-57]
Mazen, A. ECO-GREEN SILVER NANOPARTICLES PREPARATION, CHARACTERIZATION, AND TRIBOLOGICAL ENHANCEMENTS ON 6061AMC [Volume 21, Issue 1, 2024, Pages 62-77]
Mazen, A. A. FRICTION BEHAVIOR OF HYBRID COMPOSITES FILLED BY TITANIUM DIOXIDE NANOPARTICLES [Volume 14, Issue 1, 2017, Pages 40-50]
Mazen, A. A. EFFECT OF CURING PROCESS OF DENTAL NANOCOMPOSITE RESIN ON SHORE HARDNESS [Volume 13, Issue 2, 2016, Pages 25-37]
Mazen, A. A. INFLUENCE OF BRUSHING FORCE ON ABRASIVE WEAR OF TEETH [Volume 8, Issue 4, 2011, Pages 48-59]
Mazen, A. A. EFFECT OF HEAT TREATMENT ON THE TRIBOLOGICAL PROPERTIES OF TOOL STEEL AND MOLD STEEL [Volume 21, Issue 1, 2024, Pages 39-52]
Meshref, A. A. FRICTION BEHAVIOR OF HYBRID COMPOSITES FILLED BY TITANIUM DIOXIDE NANOPARTICLES [Volume 14, Issue 1, 2017, Pages 40-50]
Meshref, A. A. EFFECT OF CURING PROCESS OF DENTAL NANOCOMPOSITE RESIN ON SHORE HARDNESS [Volume 13, Issue 2, 2016, Pages 25-37]
Meshref, A. A. HARDNESS AND FRICTIONAL BEHAVIOUR OF DENTAL HYBRID COMPOSITE RESIN FILLED BY SILICON CARBIDE NANOFIBERS [Volume 19, Issue 1, 2022, Pages 28-40]
Meshref, A. A. WEAR BEHAVIOUR OF DENTAL RESIN REINFORCED BY SILICON CARBIDE NANOFIBERS [Volume 19, Issue 1, 2022, Pages 41-54]
Meshref, A. A. REDUCING ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON PROPOSED ARTIFICIAL TURF [Volume 21, Issue 1, 2024, Pages 1-11]
Mohamed, A. S. MECHANICAL PROPERTIES OF FRICTION STIR AND GAS TUNGSTEN ARC WELDED AA6061 ALUMINUM ALLOY JOINTS [Volume 17, Issue 1, 2020, Pages 36-45]
Mohamed, A. T. EFFECT OF ELECTRIC STATIC CHARGE ON FRICTION COEFFICIENT DISPLAYED BY SLIDING OF RUBBER SOLE AGAINST EPOXY FLOOR REINFORCED BY COPPER WIRES [Volume 12, Issue 4, 2015, Pages 40-52]
Mohamed, A. T. ELECTRIC STATIC CHARGE GENERATED FROM SLIDING OF EPOXY COMPOSITES REINFORCED BY COPPER WIRES AGAINST RUBBER [Volume 12, Issue 3, 2015, Pages 28-39]
Mohamed, A. T. INCREASING THE SAFETY OF WALKING AGAINST EPOXY FLOORINGS REINFORCED BY METALLIC WIRES [Volume 12, Issue 3, 2015, Pages 40-54]
Mohamed, A. T. ELECTROSTATIC CHARACTERISTICS OF COPPER WIRES REINFORCED EPOXY MATRIX COMPOSITES [Volume 12, Issue 2, 2015, Pages 55-68]
Mohamed, I. A. INFLUENCE OF HEAT TREATMENT ON FRICTION AND WEAR OF DUCTILE IRON: ROLE OF CHROMIUM AND NICKEL [Volume 9, Issue 4, 2012, Pages 40-54]
Mohamed, I. A. INFLUENCE OF HEAT TREATMENT ON FRICTION AND WEAR OF UNALLOYED DUCTILE IRON [Volume 9, Issue 1, 2012, Pages 52-64]
Mohamed, M. A. FRICTION COEFFICIENT DISPALYED BY THE FOOT SLIDING ON SCRATCHED RUBBER BRAKE PEDAL PAD [Volume 11, Issue 3, 2014, Pages 19-33]
Mohamed, M. A. TRIBOELECTRIFICATION OF METALLIC SURFACES LUBRICATED BY USED OILS [Volume 10, Issue 2, 2013, Pages 12-27]
Mohamed, M. El-Sayed Seleman EFFECT OF MULTI-PASS SHIELDED METAL ARC WELDING ON MICROSTRUCTURE CHARACTERIZATION AND MECHANICAL PROPERTIES OF 2507 SUPER DUPLEX STAINLESS STEEL [Volume 20, Issue 3, 2023, Pages 95-108]
Mohamed, M. Hedaya OPTIMIZATION OF WEAR RESISTANCE AND AMORPHOUS CONTENT FOR FECRMOCB-MG COMPOSITE BY USING FUZZY LOGIC CONTROL SYSTEM [Volume 18, Issue 4, 2021, Pages 66-78]
Mohamed, M. K. INFLUENCE OF ELECTRIC VOLTAGE ON FRICTION COEFFICIENT AND WEAR OF STEEL SURFACES LUBRICATED BY OIL DISPERSED BY POLYMERIC PARTICLES [Volume 12, Issue 2, 2015, Pages 1-14]
Mohamed, M. K. TRIBOELECTRIFICATION OF POLYMERIC TEXTILES [Volume 12, Issue 1, 2015, Pages 26-36]
Mohamed, M. K. ELECTRIC STATIC CHARGE GENERATED FROM THE SLIDING OF POLYMERS AGAINST STAINLESS STEEL [Volume 11, Issue 1, 2014, Pages 24-34]
Mohamed, M. K. INFLUENCE OF HEAT TREATMENT ON THE FRICTION AND WEAR OF POLYURETHANE COATINGS [Volume 11, Issue 1, 2014, Pages 46-57]
Mohamed, M. K. INFLUENCE OF VOLTAGE ON FRICTION COEFFICIENT DISPLAYED BY OIL ADDITIVES [Volume 10, Issue 3, 2013, Pages 29-41]
Mohamed, M. K. ELECTRIC STATIC CHARGE GENERATED FROM THE FRICTION OF TEXTILES [Volume 10, Issue 2, 2013, Pages 46-56]
Mohamed, M. K. FRICTIONAL BEHAVIOUR OF STEEL SURFACES LUBRICATED BY OIL DISPERSED BY POLYMERIC PARTICLES UNDER APPLICATION OF ELECTRIC VOLTAGE [Volume 10, Issue 1, 2013, Pages 50-62]
Mohamed, M. K. EFFECT OF MAGNETIC FIELD ON THE FRICTION AND WEAR DISPLAYED BY THE SCRATCH OF OIL LUBRICATED STEEL [Volume 9, Issue 4, 2012, Pages 12-27]
Mohamed, M. K. FRICTION COEFFICIENT DISPLAYED BY RUBBER SLIDING AGAINST FLOORING TILES [Volume 9, Issue 4, 2012, Pages 28-39]
Mohamed, M. K. SAND EROSION TESTING OF POLYMERIC COATINGS OF STEEL SHEETS [Volume 9, Issue 3, 2012, Pages 40-52]
Mohamed, M. K. FRICTION COEFFICIENT AND ELECTRIC STATIC CHARGE OF HEAD SCARF TEXTILES [Volume 9, Issue 3, 2012, Pages 24-39]
Mohamed, M. K. CHARACTERIZATION OF SOLID PARTICLES CONTAMINATING AUTOMOTIVE OILS BY FERROGRAPHIC EXAMINATION [Volume 9, Issue 1, 2012, Pages 1-11]
Mohamed, M. K. PREVENTION OF SLIP ACCIDENTS BY USING RUBBER FLOOR MAT [Volume 9, Issue 1, 2012, Pages 24-38]
Mohamed, M. K. FRICTION AND WEAR OF MOVING SURFACES IN ABRASIVE CONTAMINATED ENVIRONMENT [Volume 8, Issue 4, 2011, Pages 25-34]
Mohamed, M. K. FRICTION COEFFICIENT DISPLAYED BY FOOTWEAR WALKING AGAINST RUBBER FLOORING FITTED BY CYLINDRICAL TREADS [Volume 8, Issue 1, 2011, Pages 1-14]
Mohamed, M. K. FRICTION BETWEEN FOOT, SOCKS AND INSOLES [Volume 7, Issue 4, 2010, Pages 27-39]
Mohamed, M. K. FRICTION BETWEEN FOOT, SOCKS AND INSOLES [Volume 7, Issue 2, 2010, Pages 26-38]
Mohamed, M. K. TRIBOLOGICAL PROPERTIES OF POLYMERIC MATERIALS LUBRICATED BY SAND CONTAMINATED WATER [Volume 17, Issue 3, 2020, Pages 26-36]
Mohamed, M. K. ENHANCING THE FRICTIONAL PERFORMANCE OF SPORT GLOVES [Volume 17, Issue 4, 2020, Pages 23-33]
Mohamed, M. K. TRIBOLOGICAL BEHAVIOR OF ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE NANOCOMPOSITES [Volume 18, Issue 2, 2021, Pages 27-41]
Mohamed, M. K. INCREASING THE EFFICIENCY OF THE MEDICAL FACEMASK TO RESIST COVID-19 [Volume 19, Issue 2, 2022, Pages 1-11]
Mohamed, M. K. REDUCING THE ELECTROSTATIC DISCHARGE GENERATED FROM THE CONTACT AND SEPARATION AS WELL AS SLIDING OF POLYMERIC TEXTILES ON COTTON [Volume 19, Issue 4, 2022, Pages 54-62]
Mohamed, M. K. ENHANCING THE PERFORMANCE AND COMFORT OF POLYMERIC TEXTILES [Volume 20, Issue 2, 2023, Pages 48-56]
Mohamed, M. K. ELECTROSTATIC CHARGE GENERATED FROM THE CONTACT-SEPARATION AND SLIDING OF POLYAMIDE AND POLYESTER STRINGS BLENDED BY CARBON FIBERS ON COTTON [Volume 20, Issue 2, 2023, Pages 66-76]
Mohamed, M. K. PROPER SELECTION OF TEXTILES BASED ON ELECTROSTATIC CHARGE GENERATED FROM THEIR CONTACT-SEPARATION AND SLIDING ON WOOL FIBERS [Volume 20, Issue 3, 2023, Pages 1-11]
Mohamed, M. K. ELECTROSTATIC CHARGE GENERATED FROM THE CONTACT-SEPARATION AND SLIDING OF RAYON/POLYESTER TEXTILES ON WOOL [Volume 20, Issue 3, 2023, Pages 12-22]
Mohamed, M. K. FIBER REINFORCED POLYMER MATRIX COMPOSITES FOR ORTHOPAEDIC IMPLANTS [Volume 21, Issue 2, 2024, Pages 39-52]
Mohamed, M. Z. Ahmed EFFECT OF MULTI-PASS SHIELDED METAL ARC WELDING ON MICROSTRUCTURE CHARACTERIZATION AND MECHANICAL PROPERTIES OF 2507 SUPER DUPLEX STAINLESS STEEL [Volume 20, Issue 3, 2023, Pages 95-108]
Mohamed, S. S. MECHANICAL PROPERTIES OF FRICTION STIR AND GAS TUNGSTEN ARC WELDED AA6061 ALUMINUM ALLOY JOINTS [Volume 17, Issue 1, 2020, Pages 36-45]
Mohieldeen, Abdel-Rahman FRICTION AND WEAR OF POLYMERIC COMPOSITES FILLED BY OILS [Volume 17, Issue 4, 2020, Pages 44-54]
Mokhtar, Mokhtar O. A. LUBRICANT FILM BEHAVIOR IN SPUR GEARS [Volume 18, Issue 4, 2021, Pages 1-13]
Mona, A. Younis A NEW APPROACH FOR CONTROL SYSTEM OF SOLAR PANELS [Volume 19, Issue 2, 2022, Pages 72-87]
Mona, Younis SURFACE ROUGHNESS STUDY OF LASER CUT SURFACE [Volume 19, Issue 2, 2022, Pages 63-71]
Moshref, S. B. ON THE STRENGTH AND FAILURE MODE OF CRACKED BOLTED JOINT OF POLYMERIC COMPOSITE [Volume 9, Issue 3, 2012, Pages 13-23]
Mostafa, A. TRIBOELECTRIFICATION OF THE DIAPERS [Volume 14, Issue 2, 2017, Pages 1-15]
Mostafa, A. TRIBOLOGICAL BEHAVIOR ASSESSMENT OF 3D PRINTED PLA+ SAMPLES IMPREGNATED WITH LIQUID ANAEROBIC METHACRYLATE LUBRICANT [Volume 18, Issue 4, 2021, Pages 37-44]
Mousa, M. O. HARDNESS AND WEAR OF POLYMETHYL METHACRYLATE FILLED WITH MULTI- WALLED CARBON NANOTUBES AS DENTURE BASE MATERIALS [Volume 14, Issue 3, 2017, Pages 66-83]
Mousa, M. O. THE TRIBOLOGICAL BEHAVIOR OF POLYETHYLENE FILLED BY NANOPOWDER OF ALUMINUM OXIDE [Volume 13, Issue 1, 2016, Pages 15-29]
Mousa, M. O. WEAR OF POLYVINYL CHLORIDE FILLED BY NANOPARTICLES OF ALUMINUM OXIDE [Volume 13, Issue 1, 2016, Pages 30-42]
Mousa, M. O. FRICTION COEFFICIENT DISPLAYED BY SLIDING OF RUBBER SOLE AGAINST RECYCLED RUBBER FLOORING TILES [Volume 12, Issue 4, 2015, Pages 28-39]
Mousa, M. O. A NOVEL APPROACH FOR THE EFFECT OF THE HOUSING HEIGHT OF ANTI-FRICTION BEARINGS ON THE GENERATED VIBRATION USING DYNAMIC MODEL [Volume 12, Issue 2, 2015, Pages 15-29]
Mousa, M. O. CONTACT STRESSDISTRIBUTION OF DEEP GROOVE BALL BEARING USING ABAQUS [Volume 12, Issue 1, 2015, Pages 49-61]
Mousa, M. O. EFFECT OF POLYMERIC POWDER ON THE FRICTION AND WEAR OF SAND CONTAMINATED GREASED SURFACES [Volume 7, Issue 1, 2010, Pages 50-60]
Mousa, M. O. SURVEY OF GEAR FAULT DIAGNOSIS USING VARIOUS STATISTICAL SIGNALS PARAMETERS [Volume 19, Issue 1, 2022, Pages 14-27]
Mousa, M. O. INFLUENCE OF MULTI-WALLED CARBON NANOTUBES CONTENT ON THE MECHANICAL PROPERTIES OF COLD AND HOT CURED ACRYLIC RESIN FOR DENTURE BASE. [Volume 19, Issue 4, 2022, Pages 41-53]

N

Nabha, n VIBRATION ANALYSIS OF ADDING CONTAMINANTS PARTICLES AND CARBON NANOTUBES TO LITHIUM GREASE OF BALL BEARING [Volume 13, Issue 3, 2016, Pages 13-20]
Nabhan, A. FRICTION AND VIBRATION ANALYSIS OF SLIDING SURFACES LUBRICATED BY ENGINE OILS DISPERSED BY ALUMINUM OXIDE NANOPARTICLES [Volume 17, Issue 1, 2020, Pages 14-26]
Nabhan, A. INFLUENCE OF ADDING CONTAMINANTS PARTICLES TO LITHIUM GREASE ON FRICTION COEFFICIENT [Volume 14, Issue 1, 2017, Pages 31-39]
Nabhan, A. A NOVEL APPROACH FOR THE EFFECT OF THE HOUSING HEIGHT OF ANTI-FRICTION BEARINGS ON THE GENERATED VIBRATION USING DYNAMIC MODEL [Volume 12, Issue 2, 2015, Pages 15-29]
Nabhan, A. CONTACT STRESSDISTRIBUTION OF DEEP GROOVE BALL BEARING USING ABAQUS [Volume 12, Issue 1, 2015, Pages 49-61]
Nabhan, A. DETECTION OF LOCALIZED FAULT IN INNER RACE OF DEEP GROOVE BALL BEARING BASED ON MSC-ADAMS [Volume 17, Issue 2, 2020, Pages 23-39]
Nabhan, A. ANTI-WEAR EFFECT AND THE ROLE OF DISPERSION TEMPERATURE OF NANOFLUIDS CONTAINING AL2O3 NANO-ADDITIVES [Volume 17, Issue 3, 2020, Pages 1-13]
Nabhan, A. WEAR BEHAVIOR OF CERVICAL FUSION PLATES FABRICATED FROM POLYETHYLENE REINFORCED BY KEVLAR AND CARBON FIBERS [Volume 18, Issue 1, 2021, Pages 8-17]
Nabhan, A. TRIBOLOGICAL BEHAVIOUR OF STEEL LUBRICATED BY GREASE FILLED BY POLYMERIC ADDITIVES [Volume 18, Issue 3, 2021, Pages 11-12]
Nabhan, A. SURVEY OF GEAR FAULT DIAGNOSIS USING VARIOUS STATISTICAL SIGNALS PARAMETERS [Volume 19, Issue 1, 2022, Pages 14-27]
Nabhan, A. PERFORMANCE OF EPOXY PROTECTIVE COATING BASED ON NANOFILLERS: A REVIEW [Volume 19, Issue 4, 2022, Pages 28-40]
Nabhan, A. CHARACTERIZATION OF EPOXY RESIN REINFORCED WITH ECO-FRIENDLY VEGETABLE OILS [Volume 20, Issue 3, 2023, Pages 120-136]
Naguib, G. Yakoub ENHANCING THE WEAR RESISTANCE OF GLASS FIBER-REINFORCED PLASTIC COMPOSITES THROUGH THE ADDITION OF BORON CARBIDE AND MULTI-WALLED CARBON NANOTUBES [Volume 20, Issue 2, 2023, Pages 23-34]
Naguib, G. Yakoub INFLUENCE OF NANO-ZIRCONIA ADDITION ON THE MECHANICAL PROPERTIES OF AL-7075 REINFORCED BY NANO-BORON CARBIDE AND ALUMINUM DIOXIDE [Volume 20, Issue 2, 2023, Pages 35-47]
Nehad, E. M. SELECTION OF WORKING GLOVES BASED ON FRICTION COEFFICIENT [Volume 13, Issue 2, 2016, Pages 1-14]
Nouby, M A NOVEL APPROACH FOR THE EFFECT OF THE HOUSING HEIGHT OF ANTI-FRICTION BEARINGS ON THE GENERATED VIBRATION USING DYNAMIC MODEL [Volume 12, Issue 2, 2015, Pages 15-29]
Nouby, M. INFLUENCE OF ADDING CONTAMINANTS PARTICLES TO LITHIUM GREASE ON FRICTION COEFFICIENT [Volume 14, Issue 1, 2017, Pages 31-39]
Nouby, M. CONTACT STRESSDISTRIBUTION OF DEEP GROOVE BALL BEARING USING ABAQUS [Volume 12, Issue 1, 2015, Pages 49-61]

O

Omar, Salah ROBUST TRACKING CONTROL FOR SLOSH-CONTAINER SYSTEM AGAINST VISCOUS FRICTION UNCERTAINTY [Volume 19, Issue 1, 2022, Pages 55-65]
Omran, A. M. THE EFFECT OF WELDING FRICTION PARAMETERS ON THE MECHANICAL PROPERTIES OF THE MAINTAINED ANODIC YOK IN THE ALUMINUM INDUSTRY [Volume 20, Issue 3, 2023, Pages 63-74]
Omran, H. A. EFFECT OF HEAT TREATMENT ON THE TRIBOLOGICAL PROPERTIES OF TOOL STEEL AND MOLD STEEL [Volume 21, Issue 1, 2024, Pages 39-52]
Ossia, C.V. PERFORMANCE EVALUATION OF APRICOT KERNEL OIL-BASED CUTTING-FLUID USING L27 ORTHOGONAL ARRAYS DESIGN [Volume 19, Issue 1, 2022, Pages 66-82]

P

Pozdniakov, A. V. INVESTIGATION OF THE ABRASION RESISTANCE OF ALUMINUM COPPER MAGNESIUM ALLOY [Volume 19, Issue 4, 2022, Pages 19-27]

R

Rabie, M. FRICTION AND WEAR OF RUBBER FILLED EPOXY COMPOSITES [Volume 14, Issue 3, 2017, Pages 1-17]
Ramadan, M. A. TRIBOLOGICAL PROPERTIES OF EPOXY REINFORCED BY RANDOMLY ORIENTED CHOPPED CARBON FIBERS [Volume 16, Issue 3, 2019, Pages 48-62]
Ramadan, M. A. FRICTION AND WEAR OF SAND CONTAMINATED LUBRICATED SLIDING [Volume 13, Issue 3, 2016, Pages 1-12]
Ramadan, M. A. FRICTIONAL BEHAVIOUR OF RUBBER FLOORING MAT FITTED BY RECTANGULAR TREADS [Volume 11, Issue 2, 2014, Pages 39-52]
Ramadan, M. A. INFLUENCE OF BRUSHING FORCE ON ABRASIVE WEAR OF TEETH [Volume 8, Issue 4, 2011, Pages 48-59]
Ramadan, M. A. FRICTION AND WEAR OF AUTOMOTIVE FRICTION MATERIALS [Volume 8, Issue 1, 2011, Pages 40-52]
Ramadan, M. A. FADE AND TEMPERATURE RISE OF AUTOMOTIVE FRICTION MATERIALS [Volume 8, Issue 1, 2011, Pages 53-64]
Ramadan, M. K. MECHANICAL AND TRIBOLOGICAL PROPERTIES OF COATED STEEL BLANKING PUNCH [Volume 17, Issue 1, 2020, Pages 27-35]
Rania, Ali Abdelhameed FRICTION AND WEAR OF POLYMERIC COMPOSITES FILLED BY OILS [Volume 17, Issue 4, 2020, Pages 44-54]
Rasha, A. A. PROPER SELECTION OF FOOT WEARING SOCKS TEXTILES BASED ON FRICTION COEFFICIENT DISPLAYED BY SLIDING AGAINST INDOOR FLOORS [Volume 13, Issue 2, 2016, Pages 15-24]
Rashed, A. FRICTION AND VIBRATION ANALYSIS OF SLIDING SURFACES LUBRICATED BY ENGINE OILS DISPERSED BY ALUMINUM OXIDE NANOPARTICLES [Volume 17, Issue 1, 2020, Pages 14-26]
Rashed, A. DETECTION OF LOCALIZED FAULT IN INNER RACE OF DEEP GROOVE BALL BEARING BASED ON MSC-ADAMS [Volume 17, Issue 2, 2020, Pages 23-39]
Rashed, A. ANTI-WEAR EFFECT AND THE ROLE OF DISPERSION TEMPERATURE OF NANOFLUIDS CONTAINING AL2O3 NANO-ADDITIVES [Volume 17, Issue 3, 2020, Pages 1-13]
Rashed, A. TRIBOLOGICAL BEHAVIOUR OF STEEL LUBRICATED BY GREASE FILLED BY POLYMERIC ADDITIVES [Volume 18, Issue 3, 2021, Pages 11-12]
Rashed, A. HARDNESS AND TRIBOLOGICAL PROPERTIES OF PMMA COMPOSITE REINFORCED BY HYBRID GRAPHENE AND TiO2 NANOPARTICLES USED IN DENTAL APPLICATIONS [Volume 19, Issue 2, 2022, Pages 36-47]
Rashed, A. ENHANCING THE EFFICIENCY OF TRIBOELECTRIC NANOGENERATOR BY ELECTROSTATIC INDUCTION [Volume 20, Issue 1, 2023, Pages 41-50]
Rashed, A. CONDITION MONITORING OF LOCALIZED OUTER RACE DEFECTS OF TAPER ROLLER BEARINGS USING VIBRATION ANALYSIS [Volume 20, Issue 1, 2023, Pages 51-62]
Rashed, A. TRIBOELECTRIC NANOGENERATOR BASED ON TRIBOELECTRIFICATION AND MAGNETIC FIELD [Volume 20, Issue 2, 2023, Pages 1-12]
Rashed, A. EFFECT OF CALCIUM CARBONATE CONTENT ON THE SURFACE VOLTAGE GENERATED BY ROCKS [Volume 20, Issue 3, 2023, Pages 75-84]
Rashed, A. WIND SPEED SENSOR BASED ON SLIDING TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 4, 2023, Pages 106-116]
Rashed, A. FACTORS AFFECTING THE COEFFICIENT OF FRICTION IN A DIRECT CURRENT TRIBOELECTRIC NANOGENERATOR [Volume 21, Issue 2, 2024, Pages 53-61]
Rashed, S. E. SURFACE IMPROVEMENT OF 7075 ALLOY USING FRICTION STIR PROCESSING [Volume 17, Issue 2, 2020, Pages 1-12]
Rehab, E. Elbadawi WELDING PARAMETERS EFFECT ON THE MECHANICAL PROPERTIES OF ALUMINUM ALLOYS [Volume 19, Issue 2, 2022, Pages 24-35]
Rehab, I. A. REDUCING ELECTROSTATIC CHARGE GENERATED ON POLYMERIC FLOOR IN HOSPITALS [Volume 14, Issue 3, 2017, Pages 18-33]
Rehab, I. A. ELECTROSTATIC CHARGE GENERATED ON FLOOR MATERIAL GROUNDED BY STAINLESS STEEL STRIPS [Volume 14, Issue 2, 2017, Pages 16-27]
Rehab, I. A. ELECTROSTATIC CHARGE GENERATED ON FLOOR IN HOSPITALS [Volume 14, Issue 1, 2017, Pages 1-14]
Rehab, I. A. REDUCING ELECTROSTATIC CHARGE GENERATED FROM SLIDING AGAINST POLYMERIC FLOOR IN HOSPITALS [Volume 14, Issue 1, 2017, Pages 15-30]
Rehab, I. A. EFFECT OF ELECTRIC STATIC CHARGE ON FRICTION COEFFICIENT DISPLAYED BY SLIDING OF RUBBER SOLE AGAINST EPOXY FLOOR REINFORCED BY COPPER WIRES [Volume 12, Issue 4, 2015, Pages 40-52]
Rehab, I. A. ELECTRIC STATIC CHARGE GENERATED FROM SLIDING OF EPOXY COMPOSITES REINFORCED BY COPPER WIRES AGAINST RUBBER [Volume 12, Issue 3, 2015, Pages 28-39]
Rehab, I. A. INCREASING THE SAFETY OF WALKING AGAINST EPOXY FLOORINGS REINFORCED BY METALLIC WIRES [Volume 12, Issue 3, 2015, Pages 40-54]
Rehab, I. A. ELECTROSTATIC CHARACTERISTICS OF COPPER WIRES REINFORCED EPOXY MATRIX COMPOSITES [Volume 12, Issue 2, 2015, Pages 55-68]
Rohim, M. Nafea M. INVESTIGATION OF MECHANICAL AND TRIBOLOGICAL PROPERTIES OF THE PTFE/PA12 POLYMERIC DUAL-MATRIX REINFORCED WITH ZnO NPs FOR PROSTHETICS APPLICATIONS. [Volume 20, Issue 3, 2023, Pages 23-39]
Rohim, M. Nafea M. MECHANICAL AND TRIBOLOGICAL PROPERTIES OF POLYMETHYL METHACRYLATE MATRIX REINFORCED WITH NOVEL HYBRID ORGANIC AND INORGANIC NANO-FILLERS. [Volume 20, Issue 3, 2023, Pages 40-62]

S

Sabry, I. MECHANICAL AND TRIBOLOGICAL CHARACTERISTICS OF STIR-CASTING Al2O3-SiC-Gr/Al6063 HYBRID COMPOSITE [Volume 21, Issue 1, 2024, Pages 24-38]
Safwt, Zayed THE EFFECT OF WELDING FRICTION PARAMETERS ON THE MECHANICAL PROPERTIES OF THE MAINTAINED ANODIC YOK IN THE ALUMINUM INDUSTRY [Volume 20, Issue 3, 2023, Pages 63-74]
Sahar, A. K. PROPER SELECTION OF FOOT WEARING SOCKS TEXTILES BASED ON FRICTION COEFFICIENT DISPLAYED BY SLIDING AGAINST INDOOR FLOORS [Volume 13, Issue 2, 2016, Pages 15-24]
Said, A. E. FRACTURE TOUGHNESS ANALYSIS OF AXIAL PARTIALLY THROUGH CRACKS IN X65 AND X70 STEEL PIPES [Volume 17, Issue 1, 2020, Pages 46-52]
Sakr, Kh. M. STATISTICAL ANALYSIS ON MECHANICAL PROPERTIES OF FRICTION-STIR-WELDED SUPER DUPLEX STAINLESS STEEL SAF 2507 [Volume 21, Issue 2, 2024, Pages 93-104]
Sakr, Kh. M. THERMO-MECHANICAL MODEL AND VALIDATION FOR FRICTION STIR WELDING OF SUPER DUPLEX STAINLESS STEEL SAF 2507 [Volume 21, Issue 2, 2024, Pages 79-92]
Salam, Mustafa A. G. A. LUBRICANT FILM BEHAVIOR IN SPUR GEARS [Volume 18, Issue 4, 2021, Pages 1-13]
Saleh, S. Abdelhady WELDING PARAMETERS EFFECT ON THE MECHANICAL PROPERTIES OF ALUMINUM ALLOYS [Volume 19, Issue 2, 2022, Pages 24-35]
Salem, M. TRIBOELECTRIFICATION OF THE DIAPERS [Volume 14, Issue 2, 2017, Pages 1-15]
Salem, M. M. DEVELOPMENT OF THE COOLING SYSTEM OF A SINGLE CYLINDER DIESEL ENGINE [Volume 11, Issue 4, 2014, Pages 36-45]
Samar, A. E. SELECTION OF WORKING GLOVES BASED ON FRICTION COEFFICIENT [Volume 13, Issue 2, 2016, Pages 1-14]
Sami, A. M. A NOVEL APPROACH FOR THE EFFECT OF THE HOUSING HEIGHT OF ANTI-FRICTION BEARINGS ON THE GENERATED VIBRATION USING DYNAMIC MODEL [Volume 12, Issue 2, 2015, Pages 15-29]
Samuel, D. Y. SURVEY OF GEAR FAULT DIAGNOSIS USING VARIOUS STATISTICAL SIGNALS PARAMETERS [Volume 19, Issue 1, 2022, Pages 14-27]
Samy, A. M. ELECTROSTATIC CHARGE GENERATED FROM SLIDING ON POLYETHYLENE TURF [Volume 17, Issue 1, 2020, Pages 1-13]
Samy, A. M. FRICTION AND WEAR OF POLYMERIC MATERIALS REINFORCED BY CARBON NANOTUBES [Volume 14, Issue 4, 2017, Pages 1-14]
Samy, A. M. FRICTION AND WEAR OF POLYMERIC MATERIALS FILLED BY OIL AND REINFORCED BY NANOCARBON TUBES [Volume 14, Issue 4, 2017, Pages 15-26]
Samy, A. M. FRICTION MATERIALS REINFORCED BY PALM FIBRES [Volume 13, Issue 4, 2016, Pages 53-64]
Samy, A. M. WEAR RESISTANCE OF STEEL COATED BY POLYURETHANE REINFORCED BY STEEL WIRES [Volume 13, Issue 3, 2016, Pages 46-56]
Samy, A. M. EFFECT OF HEAT TREATMENT ON THE TRIBOLOGICAL PROPERTIES OF POLYURETHANE COATINGS [Volume 12, Issue 2, 2015, Pages 30-43]
Samy, A. M. CONTACT STRESSDISTRIBUTION OF DEEP GROOVE BALL BEARING USING ABAQUS [Volume 12, Issue 1, 2015, Pages 49-61]
Samy, A. M. FRICTION COEFFICIENT OF GROOVED RUBBER DISC SLIDING AGAINST CERAMICS: III. EFFECT OF THE GROOVES [Volume 11, Issue 3, 2014, Pages 1-18]
Samy, A. M. FRICTION COEFFICIENT OF GROOVED RUBBER DISC SLIDING AGAINST CERAMICS: I. EFFECT OF MOTION DIRECTION [Volume 11, Issue 2, 2014, Pages 1-20]
Samy, A. M. FRICTION COEFFICIENT OF GROOVED RUBBER DISC SLIDING AGAINST CERAMICS: II. EFFECT OF LOAD [Volume 11, Issue 2, 2014, Pages 21-38]
Samy, A. M. TRIBOLOGICAL AND MECHANICAL PROPERTIES OF POLYMERIC COMPOSITES REINFORCED BY METALLIC FILLERS [Volume 11, Issue 2, 2014, Pages 53-62]
Samy, A. M. ELECTROSTATIC CHARGE GENERATED FROM BARE FOOT AND FOOT WEAR SLIDING AGAINST FLOORING MATERIALS [Volume 11, Issue 1, 2014, Pages 1-11]
Samy, A. M. INFLUENCE OF HEAT TREATMENT ON THE FRICTION AND WEAR OF POLYURETHANE COATINGS [Volume 11, Issue 1, 2014, Pages 46-57]
Samy, A. M. DRY SLIDING OF TREADED RUBBER ON CERAMICS [Volume 10, Issue 4, 2013, Pages 15-28]
Samy, A. M. FRICTION COEFFICIENT OF EPOXY COMPOSITES FILLED BY METALLIC PARTICLES AND REINFORCED BY WIRES [Volume 10, Issue 3, 2013, Pages 13-28]
Samy, A. M. FRICTION COEFFICIENT OF RECYCLED RUBBER TILES OF DIFFERENT POROSITY [Volume 10, Issue 1, 2013, Pages 38-49]
Samy, A. M. EFFECT OF TALC AS SOLID LUBRICANT DISPERSING LITHIUM GREASE IN REDUCING FRICTION COEFFICIENT AND WEAR IN DUSTY ENVIRONMENT [Volume 9, Issue 4, 2012, Pages 1-11]
Samy, A. M. REDUCING THE SLIP OF RUBBER MATS ON CERAMIC FLOORINGS [Volume 8, Issue 3, 2011, Pages 1-14]
Samy, A. M. FRICTION COEFFICINET OF RUBBER FLOORING FITTED WITH HOLES AND LEAKAGE GROOVES [Volume 8, Issue 2, 2011, Pages 31-42]
Samy, A. M. ANTIWEAR PROPERTIES OF THE BLENDS OF MINERAL AND SYNTHETIC OILS [Volume 8, Issue 1, 2011, Pages 15-27]
Samy, A. M. FRICTION COEFFICIENT OF RUBBER SLIDING AGAINST DUSTY INDOOR FLOORING [Volume 7, Issue 4, 2010, Pages 11-26]
Samy, A. M. FRICTION COEFFICIENT OF RUBBER SLIDING AGAINST DUSTY INDOOR FLOORING [Volume 7, Issue 2, 2010, Pages 11-25]
Samy, A. M. REDUCING THE ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON POLYETHYLENE ARTIFICIAL TURF [Volume 17, Issue 2, 2020, Pages 40-49]
Samy, A. M. TRIBOLOGICAL BEHAVIOUR OF STEEL LUBRICATED BY GREASE FILLED BY POLYMERIC ADDITIVES [Volume 18, Issue 3, 2021, Pages 11-12]
Samy, A. M. EFFECT OF DISPERSING LITHIUM GREASE BY CLAY PARTICLES [Volume 18, Issue 4, 2021, Pages 55-65]
Samy, A. M. HARDNESS AND FRICTIONAL BEHAVIOUR OF DENTAL HYBRID COMPOSITE RESIN FILLED BY SILICON CARBIDE NANOFIBERS [Volume 19, Issue 1, 2022, Pages 28-40]
Samy, A. M. ENHANCING THE SAFETY OF EPOXY FLOOR MATERIALS BY USING COPPER CHIP [Volume 19, Issue 2, 2022, Pages 88-98]
Samy, A. M. FRICTIONAL AND ELECTROSTATIC CHARGE PROPERTIES OF TEXTILE MATERIALS [Volume 19, Issue 4, 2022, Pages 11-18]
Samy, A. M. WEAR OF HIGH DENSITY POLYETHYLENE REINFORCED BY SINGLE WALL CARBON NANOTUBES AND ALUMINIUM OXIDE NANOPARTICLES FOR BEARING MATERIALS APPLICATIONS [Volume 20, Issue 1, 2023, Pages 63-73]
Samy, Zein El-Abden FRICTION AND WEAR OF POLYMERIC COMPOSITES FILLED BY OILS [Volume 17, Issue 4, 2020, Pages 44-54]
Sandra, E. S. PROPER SELECTION OF FOOT WEARING SOCKS TEXTILES BASED ON FRICTION COEFFICIENT DISPLAYED BY SLIDING AGAINST INDOOR FLOORS [Volume 13, Issue 2, 2016, Pages 15-24]
Shaaban, S. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF RUBBER ON EPOXY FILLED BY NATURAL FIBERS [Volume 21, Issue 1, 2024, Pages 120-133]
Shaaban, S. FRICTION AND WEAR DISPLAYED BY THE SCRATCH OF EPOXY REINFORCED BY NATURAL FIBERS [Volume 21, Issue 2, 2024, Pages 62-70]
Shaaban, S. FRICTION COEFFICIENT DISPLAYED BY SLIDING RUBBER ON EPOXY REINFORCED BY NATURAL FIBERS [Volume 21, Issue 2, 2024, Pages 71-78]
Shahd, A. N. INVESTIGATION OF FRICTION COEFFICIENT OF THE SURFCAE OF ROBOTIC GRIPPER [Volume 18, Issue 1, 2021, Pages 29-39]
Shahd, A. N. INFLUENCE OF ELECTROSTATIC CHARGE ON FRICTION OF GRIPPER IN HANDLING MATERIAL [Volume 18, Issue 2, 2021, Pages 63-74]
Shahd, A. N. CONTROL OF FRICTION TO ADAPT GRIP FORCE BY ELECTROSTATIC CHARGE [Volume 18, Issue 3, 2021, Pages 52-58]
Shaltout, Mohamed L. LUBRICANT FILM BEHAVIOR IN SPUR GEARS [Volume 18, Issue 4, 2021, Pages 1-13]
Shewakh, W. M. EFFECT OF VEGETABLE OILS AS LUBRICATING/COOLING MEDIUM DURING MACHINING PROCESSES ON SURFACE ROUGHNESS [Volume 18, Issue 1, 2021, Pages 1-7]
Shewakh, W. M. NATURAL OILS AS AN ECO-FRIENDLY LUBRICANT FOR MACHINING OPERATIONS, A REVIEW [Volume 21, Issue 1, 2024, Pages 78-90]
Shimaa, A-K. R. SELECTION OF WORKING GLOVES BASED ON FRICTION COEFFICIENT [Volume 13, Issue 2, 2016, Pages 1-14]
Shoush, K. A. INFLUENCE OF MAGNETIC FIELD ON THE FRICTION AND WEAR CAUSED BY THE SCRATCH OF OIL LUBRICATED HIGH DENSITY POLYETHYLENE [Volume 9, Issue 2, 2012, Pages 1-14]
S.S., Mohamed OPTIMIZATION OF ROUNDNESS ERROR IN HARD TURNING OF AISI H13 TOOL STEEL [Volume 17, Issue 1, 2020, Pages 53-61]
S.S., Mohamed SURFACE ROUGHNESS PREDICTION IN HARD-TURNING WITH ANN AND RSM [Volume 17, Issue 2, 2020, Pages 13-22]
Suaad, H. REDUCING THE ELECTROSTATIC DISCHARGE GENERATED FROM THE CONTACT AND SEPARATION AS WELL AS SLIDING OF POLYMERIC TEXTILES ON COTTON [Volume 19, Issue 4, 2022, Pages 54-62]
Suaad, H. ENHANCING THE PERFORMANCE AND COMFORT OF POLYMERIC TEXTILES [Volume 20, Issue 2, 2023, Pages 48-56]
Suaad, H. ELECTROSTATIC CHARGE GENERATED FROM THE CONTACT-SEPARATION AND SLIDING OF POLYAMIDE AND POLYESTER STRINGS BLENDED BY CARBON FIBERS ON COTTON [Volume 20, Issue 2, 2023, Pages 66-76]
Suaad, H. PROPER SELECTION OF TEXTILES BASED ON ELECTROSTATIC CHARGE GENERATED FROM THEIR CONTACT-SEPARATION AND SLIDING ON WOOL FIBERS [Volume 20, Issue 3, 2023, Pages 1-11]
Suaad, H. ELECTROSTATIC CHARGE GENERATED FROM THE CONTACT-SEPARATION AND SLIDING OF RAYON/POLYESTER TEXTILES ON WOOL [Volume 20, Issue 3, 2023, Pages 12-22]
Sulaimany, A. A. FRICTION COEFFICIENT BETWEEN CLOTHES AND CAR SEAT COVERS [Volume 8, Issue 4, 2011, Pages 36-47]
Suzan, O. M. TRIBOELECTRIFICATION OF THE DIAPERS [Volume 14, Issue 2, 2017, Pages 1-15]

T

Taha, M. TRIBOLOGICAL BEHAVIOR OF ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE NANOCOMPOSITES [Volume 18, Issue 2, 2021, Pages 27-41]
Tarboosh, M. INFLUENCE OF INDUCTION MAGNETIC FIELD ON FRICTION COEFFICIENT OF STEEL SLIDING AGAINST OIL LUBRICATED POLYMERS [Volume 12, Issue 1, 2015, Pages 37-48]
Tawfik, A. H. G. TRIBOLOGICAL BEHAVOUR OF HEAT TREATED HOT WORK STEELS [Volume 11, Issue 1, 2014, Pages 35-45]
Tawfik, A. H. G. TRIBOLOGICAL BEHAVOUR OF HEAT TREATED COLD WORK STEELS [Volume 10, Issue 3, 2013, Pages 51-62]

Y

Youness, K. A. WIND SPEED SENSOR BASED ON SLIDING TRIBOELECTRIC NANOGENERATOR [Volume 20, Issue 4, 2023, Pages 106-116]
Youssef, M. M. FRICTION AND WEAR OF RUBBER FILLED EPOXY COMPOSITES [Volume 14, Issue 3, 2017, Pages 1-17]
Youssef, M. M. DEVELOPMENT OF THE COOLING SYSTEM OF A SINGLE CYLINDER DIESEL ENGINE [Volume 11, Issue 4, 2014, Pages 36-45]
Youssef, M. M. ABRASIVE WEAR OF POLYESTER COMPOSITES [Volume 11, Issue 2, 2014, Pages 63-72]
Youssef, M. M. RECYCLING OF THERMOPLASTIC POLYMERS BY FILLING EPOXY FLOORING MATERIALS [Volume 8, Issue 3, 2011, Pages 40-53]
Youssef, M. M. TRIBOLOGICAL PROPERTIES OF POLYMERIC MATERIALS LUBRICATED BY SAND CONTAMINATED WATER [Volume 17, Issue 3, 2020, Pages 26-36]
Youssef, M. M. SELECTION OF THE PROPER MATERIALS FOR MEDICAL FACEMASK [Volume 18, Issue 4, 2021, Pages 14-24]
Youssef, M. M. ENHANCING THE PERFORMANCE OF THE MEDICAL FACEMASK [Volume 18, Issue 4, 2021, Pages 25-36]
Youssef, M. M. DEVELOPING THE PERFORMANCE OF THE MEDICAL FACEMASK TO RESIST COVID-19 [Volume 19, Issue 1, 2022, Pages 1-13]
Youssef, M. M. EFFECT OF REINFORCING POLYPROPYLENE BY STEEL WIRES ON FRICTION COEFFICIENT AND WEAR [Volume 20, Issue 1, 2023, Pages 22-31]
Youssef, M. M. TRIBOELECTRIC NANOGENERATOR BASED ON CONTACT AND SEPARATION AS WELL AS SLIDING OF POLYAMIDE ON POLYTETRAFLUOROETHELENE [Volume 20, Issue 1, 2023, Pages 32-40]
Youssef, M. M. ENHANCING THE EFFICIENCY OF TRIBOELECTRIC NANOGENERATOR BY ELECTROSTATIC INDUCTION [Volume 20, Issue 1, 2023, Pages 41-50]
Youssef, M. M. TRIBOELECTRIC NANOGENERATOR BASED ON TRIBOELECTRIFICATION AND MAGNETIC FIELD [Volume 20, Issue 2, 2023, Pages 1-12]
Youssef, M. M. PERFORMANCE OF TRIBOELECTRIC NANOGENERATOR ENHANCED BY ELECTROSTATIC INDUCTION [Volume 20, Issue 2, 2023, Pages 13-22]
Youssef, M. M. EFFECT OF ADDITIVES ON THE TRIBOLOGICAL BEHAVIOR OF GLYCERIN-MOTOR OIL BLENDS [Volume 21, Issue 2, 2024, Pages 120-128]
Youssef, Y. M. INCREASING FRICTION COEFFICIENT DISPLAYED BY SLIDING BETWEEN THE FOOTBALL AND THE GLOVES OF THE GOALKEEPER [Volume 16, Issue 3, 2019, Pages 15-25]
Youssef, Y. M. ELECTROSTATIC CHARGE GENERATED FROM SLIDING OF POLYETHYLENE AGAINST POLYTETRAFLUOROETHYLENE [Volume 14, Issue 3, 2017, Pages 34-49]
Youssef, Y. M. DEPENDENCY OF FRICTION ON ELECTROSTATIC CHARGE GENERATED ON POLYMERIC SURFACES [Volume 14, Issue 3, 2017, Pages 50-65]
Youssef, Y. M. ELECTROSTATIC CHARGE GENERATED FROM THE SLIDING OF THE FOOTBALL ON THE GLOVES OF THE GOALKEEPER [Volume 13, Issue 4, 2016, Pages 41-52]
Youssef, Y. M. FRICTION COEFFICIENT DISPLAYED BY SLIDING THE FOOTBALL ON THE GLOVES OF THE GOALKEEPER [Volume 13, Issue 3, 2016, Pages 21-33]
Youssef, Y. M. DRY AND WATER WETTED SLIDING OF RUBBER ON EPOXY FLOORING FILLED BY THERMOPLASTIC POLYMERS [Volume 10, Issue 4, 2013, Pages 29-39]

Z

Zaini, H. TRIBOELECTRIFICATION OF METALLIC SURFACES LUBRICATED BY USED OILS [Volume 10, Issue 2, 2013, Pages 12-27]
Zaini, H. INFLUENCE OF MAGNETIC FIELD ON THE ACTION MECHANISM OF LUBRICANT ADDITIVES [Volume 9, Issue 2, 2012, Pages 15-28]
Zaini, H. INFLUENCE OF MAGNETIC FIELD ON FRICTION COEFFICIENT DISPLAYED BY THE OIL LUBRICATED SLIDING OF STEEL [Volume 9, Issue 2, 2012, Pages 29-42]
Zaini, H. INFLUENCE OF MAGNETIC FIELD ON THE SLIDING OF STEEL AGAINST LUBRICATED POLYAMIDE [Volume 9, Issue 1, 2012, Pages 39-51]
Zeidan, E. B. EFFECT OF HEAT TREATMENT ON THE ABRASION RESISTANCE OF THERMOPLASTIC POLYMERS [Volume 7, Issue 4, 2010, Pages 52-64]